Epoxy.com Product #308 Low Viscosity Injection Resin for structural loading

Skip Navigation Links

[Home] [Catalog of Products] [Where to Start] [[Bonding Systems] [Chip Floors] [Chemical Resistance] [Coatings] [Conductive] [Applications] [Elastomeric Polyurethane Systems] [Epoxy Resin Epoxy + Epoxy Hardener Systems] [Garage Floor] [High Temperature] [Industrial Floors] [Injection] [Joint Systems & Sealants] [ Methyl Methacrylate (MMA)] [Mortars / Grouts] [Novolac] [Polymer Systems] [Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips] [Product Guide] [Wood Filler] [Who We Are] [Guide Specs] [Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form]

 
Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980

Epoxy.com Product #308

Ultra Low Viscosity Structural Bonding Adhesive Epoxy

For Epoxy Pressure Injection and Mortars

DESCRIPTION

Epoxy.com Product #308 Ultra Low Viscosty Structural Bonding Epoxy is a two component, 100% solids, moisture insensitive, structural epoxy adhesive used in concrete repair. Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy is a low viscosity epoxy system that can be pressure injected or gravity fed into concrete. It can be used as a binder for making epoxy mortar. Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy meets ASTM C 881 Types I and IV, Grade 1, Classes B & C.

Advantages

  • Meets or exceedes ASTM C881 Type I (non-load bearing) and ASTM C-881 Type IV (load bearing),
    Class 1 - Low Viscosity Epoxy Standard. 
  • High modulus high strength structural properties
  • Low viscosity deeply penetrates dry concrete.
  • Moisture insensitive clean blush free surface
  • High tensile and flexural strength with exceptional durability
  • Fast cure and strength gain

WHERE TO USE

Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy System is ideal for a non-skid broadcast system.  The low viscosity resin can  gravity feed cracks in horizontal concrete and masonry Pressure injection of cracks in structural concrete, masonry, wood and other substrates .  Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy  is excellent for epoxy-mortar floor toppings and patching on dry, damp, or wet structural materials which are free of standing water.  It is also an efficient penetrating impregnation to seal dry, porous substrates, and as an adhesive for broadcast systems.

  • Sealing tunnels, cable vaults, tanks, and basements 
  • Seal interior slabs and exterior above grade slabs from water and chlorides 
  • Installation of bolts, anchors and dowels
  • Epoxy Injection of Small Cracks where low viscosity  load bearing bonding (ASTM C-881 Type IV) adhesive is required

Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy   will produce a high strength, non-shrink epoxy grout when mixed with up to 3 parts of  Epoxy.com Product #75 Filler. 

PHYSICAL PROPERTIES

Mix Ratio By Weight100 parts A to 40 parts B
Mix Ratio By Volume2 parts A to 1 part B
Pot Life (neat) @ 72°F20 minutes
Viscosity500 cps
Tack Free (thin film)4 hrs min @ 75°F
Flexural Strength
  (ASTM D-790)		13,000 psi
Compressive Strength
  (ASTM D-695)		15,000 psi
Tensile Strength
  (ASTM D-638		8,000 psi
Tensile Elongation
  (ASTM D-638)		3.0
Bond Strength
  (ASTM C882)		4000 psi
Final Cure7 days @ 75°F

SURFACE PREPARATION

Surface to receive Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy  must be clean and sound.  They may be dry or damp, but free of standing water.  For impregnating sealer application, substrate must be dry.  Remove dust, laitance, grease, curing compounds, impregnations, waxes or other contaminants by sandblasting, abrading, or wire brushing.  If applied to steel, the steel should be sandblasted, wire brushed, or prepared by other suitable means.

MIXING

Combine 2  parts  Component A with 1 part  Component B. by volume  The blend should be thoroughly mixed for at least three minutes with an Epoxy.com -Mixing Paddle  on a low speed (300 to 600 rpm) drill.

APPLICATION

Patching:  To prepare Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy as an epoxy mortar, slowly add approximately 3 parts by loose volume of Epoxy.com Product #75 Filler to the mixed Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy.

Floor Topping  Prime spalled areas with Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy; apply with a broom or 3/8 nap rollers.  While prime coat is still tacky, fill level with Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy  Mortar. Use screeds to strike off level.  One-gallon of Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy, mixed with 3 parts by loose volume of Epoxy.com Product #75-Filler will produce approximately 600 cu. in. of epoxy mortar.

Impregnation:  On smooth surfaces, apply approximately 112 sq ft / gal. of Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy  with a rubber squeegee or roller to dry substrate.  Allow time to penetrate.  Squeegee off excess while still liquid.

Concrete and Wood Injection: See Epoxy.com Injection Methods.

LIMITATIONS

  • Do not thin Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy; solvents will prevent proper cure.
  • Applications at temperatures below 50°F will prolong cure.
  • Use only oven dried aggregate to avoid encapsulation of moisture.

PACKAGING

Epoxy.com Product #308 Ultra Low Viscosity Structural Bonding Epoxy  is packaged in 3 gallon and 15 gallon units which will be weighted in the proper proportions. and continue to mix to a uniform consistency.

CAUTION

"A" Component contains epoxy resin

DANGER! "B"Component contains alkaline amines;strong sensitizer.  May cause skin sensitization or other allergic responses.

Use with good ventilation, particularly if material is heated or sprayed.  Prevent all contact with skin or eyes.  Wear protective clothing, goggles, gloves and/or barrier creams.  Keep container closed when not in use. Wash thoroughly after handling.

FIRST AID:

In case of skin contact, immediately wash with soap and water.  in case of eye contact, flush eyes with copious amounts of water for at least fifteen (15) minutes.  Remove contaminated clothing shoes.  If irritation persists, seek medical attention.  Wash clothing before reuse.

FOR INDUSTRIAL USE ONLY / KEEP AWAY FROM CHILDREN

Additional Information on Epoxy.com Epoxy Crack Injection Systems:

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 350 products,
Since 1980
Florida & Vermont
USA

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Fontaine, VP - Customer Service Director
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments
                          www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright © 1994-2012 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;  Power Tools and Equipment 90 days; Vinyl Esters,  and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days.   Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com  SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.


[Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form] [Add this page to Favorites]

5871635