Epoxy.com Product #447 Low Viscosity  Polyurethane Injection Foam

Skip Navigation Links

[Home] [Catalog of Products] [Where to Start] [[Bonding Systems] [Chip Floors] [Chemical Resistance]
[Coatings] [Conductive] [Applications] [Elastomeric Polyurethane Systems] [Garage Floor] [High Temperature]
[Industrial Floors] [Injection] [Joint Systems & Sealants] [Mortars / Grouts] [Novolac] [Polymer Systems]
[Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips]
[Product Guide] [Wood Filler] [Who We Are] [Guide Specs]
[Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form]

 

Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980

Epoxy.com Product #447

Waterproofing Elastomeric Membrane


DESCRIPTION:

Epoxy.com Product #447 Waterproofing Membrane is a latex-based liquid membrane. Epoxy.com Product #447 offers a non-toxic, one part flexible solution for a wide range of waterproofing and vapor-proofing applications.

ADVANTAGES:

  • Flexible and elastic membrane
  • Water-based compound that can be applied to damp surfaces
  • Tough abrasion-resistant coating
  • Low water vapor permeability
  • Non-staining
  • Ultraviolet resistant
  • Bonds well to many surfaces
  • Can be applied by brush, roller or spray
  • Quick drying; typically dry to the touch in one hour
  • Low odor
  • Alkali-resistant, can be applied to alkaline surfaces

WHERE TO USE:

The liquid membrane can be used in a wide variety of applications where high flexibility and good bonding are required.

  • Floors—typical applications include use beneath self-leveling floor products or above trowelable underlayments where the original membranes have been punctured.
  • Basements—The liquid membrane can be used as part of a waterproofing system below ground level.
  • Walls—The liquid membrane has good adhesion to many types of surfaces.

PHYSICAL PROPERTIES:

pH

9.0

Weight Per Gallon

9.2

Viscosity

20,000cps

Finish

Semi-gloss

Tensile Elongation ASTM D-638

21 day dry

562

7 day dry/21 day wet 657
Permeability ASTM E-96 0.013
Tensile Strength ASTM D-638
21 day dry 345
7 day dry/21 day wet 562
Water Vapor Transmission ASTM E-96 0.085
Low Temp Flex & Crack Bridging ASTM C 836 sec. 5.7 0°F No cracks No cracks
Hydrostatic Resistance ASTM D-751 Procedure B Passes
ANSI 118.10 Specification
Fungus & Micro Organism Resistance Epoxy.com Product #447 does not support mold growth

Damp-Proofness

No visible water penetration after 48 hours

APPEARANCE:

The liquid vapor membrane is waterbased latex that dries to form a tough, water and vapor-resistant film. The latex is environmentally friendly and solvent free. The liquid membrane has low odor. Epoxy.com Product #447 is available in a variety of colors. The color of the liquid compound may differ slightly from the color of the dried membrane. The formulated product is a viscous liquid similar in consistency to a thick water-based paint.

SURFACE PREPARATION:

Newly prepared surfaces should be smooth and have a troweled or brushed finish. All masonry should be flush pointed. Defects in existing surfaces should be repaired. The surface needs to be clean and free of dust, loose material, and free surface water. The membrane should not be applied under wet conditions or where these conditions are likely to occur before the membrane has fully dried. It is sometimes advantageous to pre-wet the substrate so it is damp, yet free of standing water, to improve adhesion of the liquid membrane. Check adhesion to various surfaces by applying the product to a small sample area before starting any job.

APPLICATION:

The liquid may be applied by brush, roller or airless spray. If necessary, the compound can be diluted with water. However, care should be taken to ensure the correct dry-coat thickness is applied and that the drying time is not unacceptably extended due to the dilution.

The thickness of the dried membrane depends on the application requirements and method of application. For a single dry coat thickness of more than 0.3 mm, it is recommended that the membrane be applied by airless spray. If airless spray is used, single dry-coat thickness of up to 1 mm can be obtained.

If two coats are being applied, it is recommended that the coats be applied at right angles to each other. Before applying the second coat, it is necessary to let the first coat become dry to the touch. It is preferable that the second coat is applied within 24 hours after the application of the first.

COVERAGE:

Two coats are required. Epoxy.com Product #447 should be applied at a rate of 80 square feet per gallon.

PACKAGING:

1 gallon, 5 gallon and 55 gallon drums

SHELF LIFE:

One (1) year

LIMITATIONS:

Protect from freezing. Do not apply below 40°F.

CAUTION:

Avoid ingestion of material. Wash thoroughly after handling.

FOR INDUSTRIAL USE ONLY. KEEP AWAY FROM CHILDREN.

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 350 products,
Since 1980
Florida & Vermont
USA


Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director
                          sales@epoxy.com

714-657-3826  Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666   Accounting and Administration
                         Debby Lambert, CEO, and CFO
                          office@epoxy.com

352-489-1625   Fax line to all Departments
                          www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright © 1994-2010 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;  Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight  Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days.   Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com  SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.


[Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form]