Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Ceramic Filled Trowel Grade Epoxy

Product OSVX737


DESCRIPTION:

Product OSVX737 Ceramic Filled Trowel Grade is a two-component, 100% solids, ceramic reinforced, trowelable polymeric compound which can be used to repair virtually any metal surface that has been damaged by erosion/corrosion, cavitation or abrasion.

This product is currently in very limited quantities. So sales are subject to availability.

ADVANTAGES:

  • Non-sagging, can be applied up to 1" thick.
  • Abrasion-resistance
  • No shrinkage
  • Excellent adhesion to all metals
  • Chemical-resistance
  • Heat resistance up to 450° F

WHERE TO USE:

  • Pump impellers and casings
  • Condenser tube sheets
  • Valve discs & bodies
  • Condenser boxes
  • Tank surfaces
  • Pipe bends & elbows

PHYSICAL PROPERTIES:

Color

Gray

Mix Ratio

2A:1B by volume

Pot Life

20 mins. @ 75°F

Specific Gravity

1.88

Compressive Strength
   ASTM D 695/7 days

17,000 psi

Flexural Strength
   ASTM D 790/7 days

15,000 psi

Shear Strength   (tensile: steel to steel)
   ASTM D 1002

2,400 psi

SURFACE PREPARATION:

All surfaces to be repaired must be clean of dirt, grease and oil. For best results, remove contamination with abrasive blasting and non-flammable cleaner/degreaser, making sure all dust is removed.

MIXING:

Mix entire contents of the base and activator or measure accurately (2) parts of base and (1) part of activator, by volume, and mix with spatula thoroughly to produce a streak-free material. Scrape frequently to insure complete mixing.

APPLICATION:

Apply by spatula or applicator. Material should be worked into the profile of the surface to achieve maximum adhesion. Material can be heat-cured for one (1) hour at 200° F to achieve ultimate properties.

YIELD:

(1) kg. kit will yield approximately 32 cu. in. and (2) kg. units will yield 64 cu. in.

SHELF LIFE:

2 years

PACKAGING:

Available in (1) kg. units.

LIMITATIONS:

Material should be used in 40° to 90°F temperatures and in less than 90% humidity.

CAUTIONS:

"A" Component: Warning! Contains epoxy resin. May cause skin irritation or allergic response. Avoid contact with skin. Avoid breathing vapors when heated. In case of skin contact, wash thoroughly with soap and water. In case of ingestion, do not induce vomiting.

"B" Component: Warning! Danger! Causes severe burns. Contains alkaline amines-strong sensitizer. Avoid skin contact. Avoid breathing vapors when heated. Wear protective gloves, goggles and barrier creams. In case of skin contact, wash thoroughly with soap and water. In case of ingestion, induce vomiting. If irritation persists, seek medical attention.

FOR INDUSTRIAL USE ONLY. KEEP AWAY FROM CHILDREN.

Skip Navigation Links
Epoxy.com Home PageExpand Epoxy.com Home Page

Skip Navigation Links

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Hundreds of Systems,
Since 1980 - 35 years
Florida & Vermont
USA


Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12 Noon-1PM Eastern Time for Lunch

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Fontaine, VP - Customer Service Director
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

Get important hint, tips, tricks, and product information:  Visit our Blog, and join us on Facebook and Twitter.

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks

Copyright © 1994-2017 - Epoxy Systems Inc. DBA Epoxy.com  - Commercial, Industrial, and Residential Resins Since 1980

/