Epoxy.com Product #7
All Purpose Epoxy Bonding Agent
DESCRIPTION
Epoxy.com Product #7 All Purpose Epoxy Bonding Agent is a
two component, 100% solids epoxy resin system designed to bond new concrete to
old and other materials to concrete. It has a convenient 1:1 mix ratio, by
ASTM C-881-90, Types I, II, IV and V, Grade 2, Class "B" and "C"
volume with a viscosity similar to heavyweight oil. Epoxy.com Product #7
All Purpose Epoxy Bonding Agent (adhesive) exceeds the requirements of
ASTM C-881-90, Types I, II, IV and V, Grade 2, Class "B" and "C".
ADVANTAGES
- Meets ASTM C-881-90, Types I, II IV and V, Grade2 Class "B" and "C"
- Is a Moisture Insensitive Epoxy Adhesive
- Multi-Function Epoxy - makes it suitable for many types of uses
- Very Little Odor
- 100% Solids
- Zero (0) VOC Epoxy Adhesive - No VOC means it meets the
strictest low VOC standards
USES
Epoxy.com Product #7 All Purpose Epoxy Bonding Agent
(adhesive) can be used for:
- New Concrete to Old Concrete Epoxy Binding Resin
- Epoxy Grouting Machine Base Plates
- Anchor Bolts Setting Epoxy
- An Epoxy Floor Topping with Good Chemical Resistant Properties
- A Skid-Resistant Epoxy Surface on Concrete, Steel or Timber
- A Protective Epoxy Coating.
APPLICATION
Bonding Agent
When Epoxy.com Product #7 is used as an adhesive, bonding new concrete to
existing surfaces, coat the existing area (concrete, steel, aluminum, wood) at a
rate of 100 square feet per gallon (9 m2) on smooth surfaces, 60 square feet on
rough (6 m2). Apply topping while Epoxy.com Product #7 All Purpose Epoxy
Bonding Agent
(adhesive) is tacky; if dry, recoat.
Coating
When Epoxy.com Product #7 All Purpose Epoxy Bonding Agent
is used as a protective coating, apply the material at a rate of 200 square
feet per gallon per coat (8 mils) (19 m2/3.79 L -or- 5 m2/L).
Epoxy Grout
When Epoxy.com Product #7 All Purpose Epoxy Bonding Agent
is used as an epoxy grout for machine-base grouting, add 2 parts by volume of
Epoxy.com Product #76 Epoxy Extender, or 1 part by
volume of
Epoxy.com Product #75 Filler to
produce good flow.
| PRODUCT #7 |
+ |
PRODUCT #75 Filler |
= |
MORTAR |
| 1 gal. |
|
1 gal. (3.8 L) |
|
350 cu. in. (5.74 L) |
| 1 gal. |
|
2 gals. (7.6 L) |
|
475 cu. in. (7.78 L) |
| 1 gal. |
|
3 gals. (11.36 L) |
|
600 cu. in. (9.83 L) |
| |
| PRODUCT #7 |
+ |
PRODUCT #76 Epoxy Extender |
= |
MORTAR |
| 1 gal. |
|
2 parts |
|
500 cu. in. (8.19 L) |
| 1 gal. |
|
3 parts |
|
750 cu. in. (12.3 L) |
MIXING
Stir Component "B" thoroughly before combining with Component "A". Combine 1
part volume of Component "A" with 1 part by volume of Component "B" for not less
than (3) three minutes, using a slow-speed drill motor (300 to 600 rpm) and
Epoxy.com Mixing Paddle for a uniform gray mixture. Scrape sides and bottom.
Avoid entrapping air in mixture. Apply immediately after mixing to properly
prepared surface.
APPLICATION
Surface must be clean and sound. Remove rust, grease and curing compounds by
best means available. Epoxy.com Product #7 All Purpose Epoxy Bonding Agent
may be applied to dry or damp surfaces, but not in standing water. Apply by
brush, roller or spray. Place fresh concrete while Epoxy.com Product #7
All Purpose Epoxy Bonding Agent
(adhesive) is still tacky. If epoxy hardens simply apply another coat.
PHYSICAL PROPERTIES
| Color |
Gray |
| Ratio A:B |
1:1 |
| Viscosity |
6,000 cps |
Modulus of Elasticity
ASTM D 695 |
550,000 psi min. @ 28 days
3792 MPa |
Bond Strength, Hardened to Plastic
ASTM C 882 |
2,000 psi min. @ 14 days
13.79 MPa |
Tensile Strength
ASTM D 638 |
6,000 psi min. @ 7 days
41.37 MPa |
Tensile Elongation
ASTM D 638 |
3% @ 7 days |
Flexural Strength (Modulus of Rupture)
ASTM D 790 |
7,500 psi @ 14 days
51.7 MPa |
Compressive Strength
ASTM D 695 |
10,000 psi min. - 7 days
68.95 MPa |
Water Absorption
ASTM D 570 |
2 hour boil 0.40% - 7 days |
Effective Shrinkage
ASTM C 883 |
0% |
Pot Life
(1 gallon) |
30 mins. @ 60°F (15.6°C)
25 mins. @ 75°F (24°C)
15 mins. @ 90°F (32.2°C) |
Tack-Free Time
(7.5 to 8 mils thick) |
6 hrs. @ 60°F (15.6°C)
3 hrs. @ 75°F (24°C)
1 hr. @ 90°F (32°C) |
LIMITATIONS
Application of Epoxy.com Product #7 All Purpose Epoxy Bonding Agent
to surfaces with a temperature below 50°F (10.0°C) prolongs cure. Do not use if
surface temperature is below 40°F (4.4°C).
CAUTION
"A" Component contains epoxy resin. DANGER! "B" Component contains alkaline
amines; strong sensitizer. May cause skin sensitization or other allergic
responses. Use with good ventilation, particularly if material is heated or
sprayed. Prevent all contact with skin or eyes. Wear protective clothing,
goggles, gloves and/or barrier creams. Keep container closed when not in use.
Wash thoroughly after handling.
FIRST AID
In case of skin contact, immediately wash with soap and water. in case of eye
contact, flush eyes with copious amounts of water for at least fifteen (15)
minutes. Remove contaminated clothing shoes. If irritation persists, seek
medical attention. Wash clothing before reuse.
FOR INDUSTRIAL USE ONLY. KEEP AWAY FROM CHILDREN.
|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
714-657-3826 Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2010 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four
(4) months; Power Tools and Equipment 90 days; Vinyl Esters,
High Molecular Weight Methacrylates (HMMA) and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
|