Epoxy.com Coal Tar Epoxy Products
Frequently Asked Questions
Below are some of the questions that have been emailed to Norm Lambert at
norm@epoxy.com and some of his answers.
Have a question for Epoxy.com? If so, please email Epoxy.com Technical Support.
For use in potable water?
Q: "Epoxy.com Product #210 Coal Tar
Epoxy says on its technical data sheet that it meets the
performance criteria for the American Water Works Association Specification
C-210. Does that mean I can coat the inside of my steel potable water
tank with it?"
Norm Lambert: No. To use on the inside
of your tank you will need NSF or UL approval for direct contact with
drinking water. American Water Works Association Specification C-210
deals with the standard for coating the outside of a tank with an Epoxy.
Which Coal Tar Epoxy is Best?
I notice that Epoxy.com has two different Coal tar Epoxies:
Epoxy.com Product #210 and
Epoxy.com Product #216. Which one is the best?
Norm Lambert: The reason we make the two versions is so that you have a choice for which one is
Right Product for Your Job.
Both products will hold up for long periods of time, when other products will not.
Epoxy.com Product #216
Coal Tar Epoxy Coating meets all requirements of Corp. of
Engineers C-200, Federal Specification DOD-P-23236 (SHIPS), and SSPC 16-91.
Epoxy.com Product #210 Coal
Tar Epoxy Coating meets American Water Works Association
Specification C-210. So if you are working a job with one of these
specifications, that will determine which Epoxy.com Coal Tar Epoxy is right
for your job.
Epoxy.com Product #216
Coal Tar Epoxy Coating is 86% Solids, so there is some solvent odor when working with it. However, the solvent gives you a longer working time.
Epoxy.com Product #210 Coal Tar Epoxy
is 100% solids, so it is Zero (0) VOC - no solvents. So
Epoxy.com Product #210 meets even the
strictest VOC requirements. That means that you have no odor, but you
will have a shorter "pot life".
Still confused as to which one to use email
Epoxy.com Technical Support
or give them a call at 352-533-2167.
|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2012 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;
Power Tools and Equipment 90 days; Vinyl Esters, and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
[Add this page to Favorites]
557
|