Epoxy.com Carvable Wood Filler
CARVABLE POLYESTER WOOD FILLER
DESCRIPTION
Epoxy.com Polyester Wood Filler is a two component, wood like
polyester filler paste. Quick setting and easy to use. Epoxy.com Polyester
Wood Filler is designed primarily for wood repairs in construction
surfaces. Can be used to fill areas of deteriorated concrete (or holes). Also
used by model shops for making permanent repairs, fillets, and design changes in
the construction of all wood models and patterns. Epoxy.com Polyester Wood
Filler has excellent adhesion to wood, fiberglass, and plaster and can
be worked with standard woodworking tools in a quick and convenient manner.
APPLICATION PROCEDURES
Surface Preparation
Prior to application, area to be repaired should be roughened and thoroughly
wiped clean to ensure proper adhesion.
Mixing Instructions
Thoroughly blend 100 parts resin (a golf ball size mass) with 2 parts (2"
strip) hardener for 1 1/2 minutes in a clean dry container carefully scraping
sides and bottom of container during the mixing process to ensure uniformity.
Application
Epoxy.com Polyester Wood Filler should be applied by
"buttering" onto area to be repaired. After material has cured, the repair area
can be sanded to desired surface finish.
Storage
Epoxy.com Polyester Wood Filler should be stored at a
temperature less than 85 degrees F. Storage above 85 degrees F will shorten the
shelf life and render the product unusable. The shelf life for this product is
one year.
SAFETY PRECAUTIONS
For industrial use only. Keep away from children. Refer to Material Health
and Safety Data Sheet (MSDS form) pertaining to this product before using. Avoid
contact with skin or eyes. In the event of eye splash or contact, immediately
flush with water for 15 minutes and contact physician. If skin contact occurs,
wash with mild soap and water. Prolonged or repeated exposure may case skin and
eye irritation. It is recommended that the user wear impervious gloves and
safety glasses with side shields. This information is presented in good faith to
assist the user in determining whether our products are suitable for his
application. No warranty or representation, however, is intended or made, nor is
protection from any law or patent to be inferred, and all patent rights are
reserved.
HANDLING PROPERTIES | TEST METHOD |
VALUE |
|---|
| Mix Ratio | Resin to Hardener
by wt. or vol.) | 100R to
2H |
| Viscosity or Consistency @77°F | ASTM D-2393 | Thixotropic
Paste |
| Pot Life (100 gram mass @77°F) | ASTM D-2471 | 4- minutes |
| Cure Schedule | @77 F. | 12-15
minutes |
PHYSICAL PROPERTIES |
|---|
| Specific Gravity (g/cm) | ASTM D-792 | 1.04 |
| Shore D Hardness | ASTM D-2240 | 55-60 |
| Service Temperature (peak) | 185°F |
| Water Absorption-24 hrs. @77°F (%) | ASTM D-570 | .18 |
| Machinability | Excellent |
| Available Colors | Pine, Mahogany |
|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
714-657-3826 Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2011 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;
Power Tools and Equipment 90 days; Vinyl Esters, and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
|