Novolac and Highly Chemical Resistant Coatings
Product #600
Flexible Novolac
Product #630
Novolac Coating/Mortar Binder
Product #632 Novolac
Control Joint Filler is a 100% solids
flexible Novolac epoxy Chemical Resistant joint filler for saw-cut joints of
concrete slabs on grade.
Product #633 Novolac
Coating
Product #634 Novolac
High Temperature Epoxy
Product #635 Novolac
Coating/Mortar Binder
Product #636 High
Temp Chemical Resistant Primer/Topcoat - a 100% solids amine
cured epoxy Novolac that is solvent free. Specifically designed as a Methanol
resistant coating. Product #635 is well suited for use in a wide array of
aggressive acids, alkalies and organic solvents. It produces a tough, chemical
resistant coating on concrete, iron and non-iron surfaces. As a low viscosity
epoxy Novolac it is suitable for hand or spray application.
Product #637
High Temp Coating/Primer
Product #638 Glass Filled Novolac
Product #640
Chemical & Heat Resistance
Product #641
High Temp Epoxy is a
moisture-insensitive, two-component, 100% solids epoxy coating. It is especially
formulated to protect concrete, steel and wood subject to high temperatures and
corrosion.
Product #641LV High Temp Resistant
Mortar is a two component highly cross-linked novolac epoxy resin system. It
is especially formulated to be used as a high temperature grouting or laminating
resin. It is used to protect concrete, steel and other substrates from high
temperatures and corrosion.
Product #642
Multifunctional High Chemical Resistance Epoxy
Coating/Bonder
PRODUCT #643
Highly Chemical Resistant Coating is a solvent
free, high functionality Novolac epoxy coating suitable for immersion and
non-immersion service. Designed specifically as a Methanol resistant coating.
It is well suited for protection in a wide array of aggressive acids, alkalies
and organic solvents. It produces a tough, chemical resistant coating on ferrous
and non-ferrous metals and concrete.
Product #644 High Temp Chemical Resistant Coating. Similar to
641LV, but with fillers to make it thicker.
Product #645 High Temp Coating
648 Chemical Resistant Coating is a two component high performance epoxy resin formulated with a convenient 1 to 1 mix ratio. EPOXYSYSTEMS’ PRODUCT #648 Chemical Resistant Coating has been developed as a coating for exposure to organic acids and other severe chemical environments. It is used widely in the food and chemical industries for protection of concrete, wood, and steel. EPOXYSYSTEMS’ PRODUCT #648 is suitable for application by brush, roller or spray. Where in-shop production techniques may be utilized and elevated temperature curing is feasible, rapid property development may be achieved by curing at 200 - 250°F (93 - 121°C). This will provide a cured film which may be handled within a relatively short period of time (about 4 hours). Elevated temperature curing will also enhance ultimate physical and chemical resistant properties.
Epoxy.com Home Page > Product Catolog > Novolac Coatings
Proper mixing and installation is critical to the optimal success of all
product. See Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
375 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
714-657-3826 Technical Support
Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Copyright © 1994-2007 EPOXY.COM a
division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy
Systems™ Product Company ("ESI") warrants its products (when properly stored)
for the period of time as follows: Epoxies, Product #315, Product #315BC, and
Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2)
months and Polyurethanes Four (4) months; Power Tools and Equipment 90
days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all
other resins (not specifically mentioned above) 30 days; hand tools (non-power
tools) 30 days. ESI warrants that its products will be free of
manufacturing defects and will be in conformity with published specifications
when handled, stored, mixed and applied in accordance with recommendations of
ESI. If any product fails to meet this warranty, the liability of ESI will be
limited to replacement of any non-conforming material if notice of such
non-conformity is given to ESI within the warranty period for the material (as
indicated above), or within 1 year of the delivery of materials (whichever is
sooner). ESI may in its discretion refund the price received by ESI in lieu of
replacing the material. No customer, distributor, or representative of ESI is
authorized to change or modify the published specifications of this warranty in
any way. No one is authorized to make oral warranties on behalf of ESI. In order
to obtain replacement or refund the customer must provide written notice
containing full details of the non-conformity. ESI reserves the right to inspect
the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED
WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR PURPOSE. ESI'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY
UNDERTAKEN ABOVE AND ESI SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE
PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY,
WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of
our products are made on an individual order basis. Unless
authorized in writing by Epoxy Systems, Inc. in writing before the material is
made, there are no returns on items purchased from us, once the order has been
processed, and the material made. In the event of authorized returns a
restocking charge will be charged in the amount of 30% of the value of the
material returned or $150 whic]
Secure Login
[Technical
Data Sheets in Adobe Acrobat Format][MSDSs
in Adobe Acrobat Format][
Online-
Ordering Authorization Form]
Secure Login
[Technical
Data Sheets in Adobe Acrobat Format][MSDSs
in Adobe Acrobat Format][
Online-
Ordering Authorization Form]
Secure Login
[Technical
Data Sheets in Adobe Acrobat Format][MSDSs
in Adobe Acrobat Format][
Online-
Ordering Authorization Form]
Secure Login