[Epoxy Home] [Catalog of Products] [Where to Start] [Guide Specs] [Epoxy Installation Guides] [Blog Posts] [Epoxy Bonding Systems] [Chip Floors] [Chemical Resistant Epoxy] [Seamless Coatings] [Conductive Epoxy Flooring] [Crack Injection of Concrete & Wood] [Applications] [Elastomeric Polyurethane Systems]  [Seamless Garage Flooring Resins] [High Temperature Epoxy Resins] [Seamless Industrial Floors] [Joint Systems & Sealants] [Methyl Methacrylate MMA ] [Novolac Epoxy Resins] [Epoxy Mortars & Grouts] [Epoxy Novolac] [Primers Sealers] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Epoxy Installation Tips] [Who We Are]  [Epoxy Tech Data Sheets in Acrobat] [Product MSDS Sheets] [Online Order Authorization Form][Contact UsPhone 352.489.1666

  Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980Contact Us  

 


Very well done!

Mica Company of Canada, Inc.

Richard L. Hanson
Thu Apr 30 15:18:37 1998

 


What epoxy and/or system can be used to make small light, portable platforms capable of holding 300+lbs. The end product must be light and stronger than steel.
I would appreciate any feed back.

You have a very interesting web page.


Doug Sayer
Bentonville, AR USA - Thu Nov 20 14:37:08 1997


Exploring web for info on wood paste fillers and found your page. Would like more info etc.
Doug Sayer <datasrch@ipa.net>
Bentonville, AR USA - Thu Nov 20 14:03:56 1997


Hello,
I am a professor in chemical synthesis for 10 years .
Please inform me about the following :
* Acid Chromium System and how can be applied as pre treatment in coating purpose .
* How the oxides of the metal ions which exist as powder on the surface of hard material can be cleaned .

Waleed Said <UFD@gega.net>
6 October, Cairo Egypt - Wed Nov 19 23:00:08 1997


Excellent source of the Information
Waleed Said <UFD@gega.net>
6 October, Cairo Egypt - Wed Nov 19 22:45:44 1997


I am a student at Iowa State. I am doing a presentation about fillers and I checked out your web page to see what info you had on hand. Thanks for your time.
Joel Harmsen <joel345@iastate.edu>
Ames, Ia USA - Sun Nov 16 20:35:27 1997


HELLO, I AM LOOKING FOR INFORMATION ON EPOXY/RESIN FLOORS WITH COLOR FLAKE CHIPS... THIS WOULD BE FOR A BASEMENT APPLICATION... PLEASE SEND NAME OF LOCAL INSTALLERS IF YOU HAVE THAT, ALSO IF I WANT TO DO THIS JOB MYSELF CAN I PURCHASE MATERIALS FROM YOU. PLEASE SEND AS MUCH INFORMATION AS POSSIBLE TO:

ANGELO
Wood-Ridge, New Jersey

WOOD-RIDGE, N.J. USA - Sun Nov 16 15:19:00 1997


I am In need for more suppliers of Epoxy injection and coating products and Equipment

ST.CATHARINES, ONTARIO

st.catharines, ontario canada - Sun Nov 16 05:24:35 1997


I am a Engineer/Scientist in the semiconductor industry.
I am also a member of the Society for Plastics Engineering
(SPE). I have been doing research and experiments with
various resin systems as encapsulates and molding
materials. (I recently had a plastics paper published
at the International Microelectronics and Packaging
Society's annual symposium.)
I guess my original interest and experience
with resins and fiberglass dates clear back to junior
high school (35 years ago) when I began building
surfboards and skim boards.

Lonne
Phoenix, AZ USA - Sat Nov 8 17:34:03 1997



J T Starr
Orlando , FL USA - Mon Nov 3 19:23:04 1997


Do You have Any Pictures Of Resin
Andrew Hutchinson
Anchorage, AK USA - Sun Nov 2 17:07:23 1997


I need some detail about describing the epoxy products
Guoda Lian <gl209@cus.cam.ac.uk>
Cambridge, UK - Tue Oct 28 09:41:02 1997



Tom Maguire
New York, NY USA - Mon Oct 27 07:41:42 1997


PLEASE SEND INFO. (602) 780-2589
LEIGH ADELMANN
PHOENIX, AZ USA - Sun Oct 26 18:29:51 1997

 


Thanks for the great info for my oral presentation for my Construction Engineering Materials and Methods class at Iowa State!
I would love to learn more about epoxy, so if anyone has any obscure info about epoxy that piques interest, I would love to
hear about it, especially before Nov 13th. :) What a great industry!!

Katie Minter <sky@iastate.edu>
Ames, IA USA - Sat Oct 25 13:04:37 1997


We are looking for a non-skid epoxy floor coating for our A.D.A. ramps.
These are outdoor ramps.

ken sayles <>
vallejo, ca USA - Fri Oct 24 10:14:50 1997


I am interesting about kinetic of epoxy curing
Jose Denoel <Jose.Denoel@ulg.ac.be>
LIEGE, BELGIUM - Sun Oct 19 13:24:23 1997


I'm interesting in your products.
please send me information.

miguel angel ferral tamayo <torremar@acnet.net>
tampico, tamps mexico - Wed Oct 15 17:02:20 1997


I have the need for a good durable finish sealer for a 6000 sq. ft. machine shop floor. My budget is not large but i need something that will give reasonable life as well as the safety factor. I have printed out the info you provide on the #850 Penetrating sealer. You have a great web page, now all i have to do is learn how to use this computer. Thanks, La Var

LaVar Durney

cocoa, fl USA - Mon Oct 13 17:17:48 1997


Interested in purchasing the MMA for sculptured or acrylic nails. Please contact
Larrie davis <www.ldavis@eri.eqt.com>
Pittsburgh, PA USA - Thu Oct 9 09:25:54 1997


I was just browsing and came up on Novolac, cool sound. IF PEOPLE NEED HELP ON GOOP OR INFO YOU DO NOT HAVE SEND ME THE QUESTIONS, MAYBE I CAN HELP. QUESTIONS IN ENGLISH & FRENCH WELCOME.
Bradley Adhesives ( Steve)
Ottawa, Canada - Wed Oct 8 09:45:19 1997


WE DO A TREMENDOUS AMOUNT OF EPOXY INJECTION EVERY YEAR.
BILLY CRAIG <>
JACKSONVILLE, FL USA - Thu Oct 2 04:12:12 1997


Hi we make fiberglass swimming pools and gel coats I am looking for prices on container lots of epoxy resins and glues I would also be interested in buying a formulation for epoxy resin so I could make it myself
Ihope someone can help me
Regards Brett

Fibre-Tek <>
Gold Coast, QLD AUST - Tue Sep 30 10:21:49 1997


I install and grind epoxy terrazzo systems but not familiar with your product. Do you have samples available or can I obtain your product locally in central New Jersey area. Please send literature on epoxy terrazzo resins (colored & clear) and pourable joint fillers.
Steven Massa <>
Dunellen, NJ USA - Sun Sep 28 02:47:33 1997


We are interested in your product of#30 .
please send me more detail.
fax:81-92-932-0336

reanal hiroshi kamo <>
Japan - Sat Sep 20 11:32:44 1997


WE OPERATE A CONTRACTOR SUPPLY HOUSE; SPECIALIZING IN
REPAIR PRODUCTS FOR CONCRETE. MATERIALS AND EQUIPMENT FOR INJECTION REPAIR, DECORATIVE OVERLAY'S AND STRUCTURAL PATCHING.
ANY INFORMATION ON PRODUCTS THAT YOU DEAL IN OR METHODS USED IN YOUR PART OF THE COUNTRY THAT WOULD BE HELPFUL TO OUR CUSTOMERS WOULD BE OF INTEREST TO US.
THANKS,
CMR

CHRIS ROCKEL <>
ST. LOUIS, MO USA - Tue Sep 16 14:32:13 1997


please send information.
Barry Klimas <>
calgary, can - Tue Sep 16 14:09:40 1997


I am searching for a castable resin or compound which I can use to make pro-types of vessels to hold decorative fountain. It would be helpful if the material could be sculpted after the rough layout has been constructed.
Fred Mason <>
Norfolk, VA USA - Sun Sep 7 16:11:25 1997


I have experienced gassing of many of the existing concrete slabs after prep and epoxy coating . How are others dealing with this???
Jim Taylor <jtaylor@eznet.com>
Spokane , WA USA - Tue Sep 2 21:36:46 1997


Got here looking for comparative prices/chemical resistance of floor coatings. Found you from aol and alta vista. Nice music.
Brain Lighthart <briklight@aol.com>
Eugene, OR USA - Mon Sep 1 11:16:10 1997


I am trying to find a product called White Lighting, something used for sealing in the fuzzing on Kevlar or Fiberglass surfaces
Thanks

Steve VanVleet <www.vanfeet@AOL.com>
Corpus Christi, TX USA - Mon Aug 25 13:11:19 1997


Is there a product that one can use to separate objects
that have been bonded using the two part epoxies?????

Wayne Maceachern <maceachern-w@dcs@rmc>
Kingston, Ont Canada - Thu Aug 21 18:00:46 1997


Looking for a fuel resistant glue
Grant Bergh <gbergh@mweb.co.za>
CT, RSA - Tue Aug 19 12:33:44 1997


we sell surface treatment equipmen (portable shot blasters and scarifiers etc.)t for epoxy appliers and are interested in your new products.
mailing address:

TRIMMER srl
Via Piave 47 z.i.
20070 Castelnuovo Bocca D'adda (Lodi(
Italy
Tel 0039 - 377 - 700125
Fax 0039 - 377 - 702614

elizabeth martin
castelnuovo bocca d'adda, lodi italy - Mon Aug 18 11:17:49 1997


we sell surface treatment equipmen (portable shot blasters and scarifiers etc.)t for epoxy appliers and are interested in your new products.
mailing address:

TRIMMER srl
Via Piave 47 z.i.
20070 Castelnuovo Bocca D'adda (Lodi(
Italy
Tel 0039 - 377 - 700125
Fax 0039 - 377 - 702614

elizabeth martin <fax 0039 - 377 -702614>
castelnuovo bocca d'adda, lodi italy - Mon Aug 18 11:17:12 1997


can your product, Epoxy.com #63 be used for concrete
cinder block retaing wall structures?

melanie <ljpinc@mobiletel.com>
larose, la USA - Thu Aug 14 09:35:18 1997


Hi.
I want kown about poliuretane. If you kwon where i can take something about this please...
Sorry about my english.Bye

Fabio de Foggi <ffoggi@br2001.com.br>
S? Paulo, SP Brasil - Thu Aug 7 16:45:16 1997


You give a lot of info on epoxy. I'm looking for an epoxy or MMA with a viscosity of about .01-.02 poises
Mark A. Presslein <mark_presslein@cemcom.com>
Baltimore, MD USA - Wed Aug 6 09:28:10 1997


Looking for top notch company and products and
application tools for national and international industrial
flooring installation opportunities.

Angela
Cullman, AL USA - Sat Aug 2 15:53:14 1997


We are producing hardeners epoxy for floor coating 20% more competitive than competitor ALIPHATIC BASED IPDA ALIPHATIC PHENALKAMINE MANNICH BASIS
montereau, france - Fri Aug 1 14:33:45 1997


Hi Norm!

Thanks for e-mailing me the information about the sealers. My computer hasn't had internet-capabilities in quite a while, I'm still waiting for our computer-guy to fix it. I'm using a co-workers computer now. Your web pages look great. I'll talk with you soon. Jennifer

Jennifer Gerry <jennifer.gerry@vtmednet.org>
Williston, vt USA - Thu Jul 31 05:18:59 1997


I'm looking for a supplier for a inexpensive 2 part epoxy for wood that is applied by an Manuel injection gun. I now use a 3m product but it seems a little expensive.
Darrell Hilton
salinas, ca USA - Wed Jul 30 08:26:26 1997


CROSBIE COATINGS/WILLIAMS CASCO
LOWER WALSALL STREET
WOLVERHAMPTON
WEST MIDS
ENGLAND.

We are a user of various grades of epoxy media particularly Epikote 1001x75 types and a variety of solvent free resins and reactive diluents. We are always looking for competitive suppliers to ourselves.
We manufacter a comprehensive range of coatings for the structural steel and building industry.We have been involved in many high profile domestic and overseas projects and provide a comprehensive customer service.
Please do not hesitate to contact us for further information.
This epoxy site is avery useful forum for anyone involved in the epoxy industry.

MANCHESTER, UK - Fri Jul 18 23:52:37 1997


Looking for epoxy flooring product information

Sheridan, WY USA - Fri Jul 18 10:05:12 1997


can i use the epoxy for grout lines when i tile?
how should i apply it in between grout lines?

franklin
USA - Wed Jul 16 19:16:52 1997


i am looking for an epoxy wood filler. 50/50.
i saw it on an episode of "this old house"
waas being use to repair old windows and other wooden
structures. it replaced the decayed wood. its sandable
paintable. comes in a 2 cartridges dispensing system.
double gun mixing in equal part.
andre savard <anmar@sympatico.ca>
lachine, qu canada - Fri Jul 11 19:13:06 1997


ARE YOU ABLE TO SUPPLY INFORMATION ON DERAKANE RESIN PRODUCTS, SUCH AS 411-45, OR AN EXACT EQUIVALANT
clive woodley <eagleair@iinet.net.au>
perth, wa australia - Thu Jul 10 21:32:49 1997


Good reference site, keep the good work going


Jip van Eijden <jiputreg@xs4all.nl>
Utrecht, The Netherlands - Thu Jul 10 05:06:16 1997


I'm a technical employee at a semi-governmental institute
that conducts research and quality-control. My specialty
is screeds and in that broad subject I prefer resin-flooring
techniques. I am looking forward to further exploring
this site, so I'll end my handshake here.

CU
O.R. de Vries

O.R. de Vries <orvries@globalxs.nl>
Moordrecht, the Netherlands - Sat Jun 28 07:45:39 1997


PLEASE SEND INFORMATION ON POTABLE WATER LININGS TAYLOR SERVICES FAX NUMBER:304 323-1632
TAYLOR SERVICES
Princeton, WV USA - Fri Jun 27 17:07:11 1997


TAYLOR SERVICES'S FAX NUMBER:3O4 323-1632
TAYLOR SERVICES
Princeton, WV USA - Fri Jun 27 17:02:02 1997


I AM LOOKING FOR A SUPPLIER WITH GOOD QUALITY RESINS. P.S. THANK YOU.
STOP-A-CRACK W/S REPAIR <rlacas@bayou.com>
WEST MONROE, LA. USA - Thu Jun 26 19:37:46 1997


MANAGER
FREEMAN DISTRIBUTION LTD
DISTRIBUTOR OF :
Shell UK- Epoxy & Polys
Anchor - Curing Agents & Diluents
DSM. BASF - Polyester & Vinyl Esters
Owens Corning
and many more...
Nice to see a someone doing thier bit on the Net
Regards

Ps.
If you require any European or technical / advise / info I would be pleased to help.

Stuart Shields <>
Halstead, Essex UK - Tue Jun 24 13:18:29 1997


Amazing things have been done with epoxies and I am
very interested in your page

Joe Bertolino Jr. < >
East Hanover, NJ USA - Mon Jun 16 12:58:01 1997


Excellent site. I think your effort may serve as benchmark fro others.
Cheers,
Jan.

Jan Bossaerts <j.d.bossaerts@skynet.be>
Overijse, Brussels, Belgium - Fri Jun 13 04:44:24 1997


NIce Page!!
Kevin Mulkern <Kevinm@truesdaleco.com>
Brighton, MA USA - Tue Jun 3 05:58:34 1997


I am an artist who is looking to use resins to create a new body of work.
I would like to have a two-part resin material that has a glossy plastic surface.
The more I learn about resins, the more I know I need to find the right resin material before I learn about the process I need to create my work.
If you have any answers or suggestions as to what resin you might recommend, I would be forever grateful.
Karen Channel <Chanelous (or Chanelish) @aol.com>
STL, NYC, MO USA - Wed May 28 13:21:39 1997


Broderick Enterprises, Inc. has been providing quality Shot Blast equipment to the Floor Coating Industry since 1982. We provide Sale, Service, Rental and Lease Purchase of both Nelco and Blastrac Portable Shot Blast Equipment. Our toll free number 800-321-3917. Our local number is 314-451-3917.
Bryan Broderick <Shotblaster@msn>
Gray Summit, Mo USA - Fri May 23 11:54:53 1997


Broderick Enterprises, Inc. has been providing quality Shot Blast equipment to the Floor Coating Industry since 1982. We provide Sale, Service, Rental and Lease Purchase of both Nelco and Blastrac Portable Shot Blast Equipment
Bryan Broderick <Shotblaster@msn>
Gray Summit, Mo USA - Fri May 23 11:52:29 1997


Our polyester wood filler bonds fine to clean dry non-pressure treated wood. No primer is required. The bond to this would is greater than the tensile strength of the wood. In simpler terms for Epoxy.com Wood filler come off the wood it is attached to (when properly installed to the right wood) it will pull the layer of wood it is attached to off with it. Any bond strength greater than that would be academic and have little practical use.

Most polyesters are only good for 6 months or less.

Thank you for your interest in my firm's products and services. Please contact me with your additional questions, concerns, and/or material needs.

Norm Lambert
President
Epoxy Systems, Inc.
352-489-1666 (voice)
(802) 899-3843 (fax)
norm@epoxy.com (email)
http://www.epoxysystems.com (WWW)

Norm Lambert <norm@epoxy.com>
USA - Wed May 21 08:25:20 1997


I understand that polyester resin does not bond well
to wood, so I'm looking for a primer that will stay
stuck to the plywood deck on my boat.
Possibly:plywood deck
primer for wood/polyester fiberglass interface
polyester resin fiberglass
paint
layered in that order.
How does that look or do you have a better idea?
My polyester resin is about 4 years old. Is it still
useable?
Thank you for any help you can offer.
Regards
Al

homenick@freenet.mb.ca

Al Homenick <homenick@freenet.mb.ca>
Winnipeg, MB Canada - Tue May 20 21:40:59 1997


i wanna know more about epoxy patching compound. it's a mixed type and can be cured within 20-40 minutes in 25-38 deg C environment.
well, equivalent to it is manufactured by Valspar Inc, Canada. well, it's for FBE or Coal Tar type of coating repair.


fazli khir <ievgroup@ppp.nasionet.net>
USA - Mon May 12 03:19:40 1997


I LIKED YOUR HOME PAGE A LOT. I AM GOING TO VISIT THIS SITE MORE OFTEN TO GET THE LATEST INFO ABOUT THE EPOXY RESINS. SINCE OUR COMPANY IS ALSO IN THE CONSTRUCTION BUSINESS AND SINCE WE USE EPOXY RESINS VERY OFTEN, I FOUND YOUR PAGE TO BE OF GREAT INTEREST TO ME AND TO MY COMPANY.
ELIF ARIBURNU <ELIFARIBURNU@msn.com>
BOSTON, MA USA - Tue May 6 15:18:40 1997


In search of castable epoxy system to be used inside of electric wireline tools for the oil and gas exploration industry. High temperature resistance is very important as down hole temperatures approach 300 degrees F.
Gerald Kalb
Fort Worth, TX USA - Fri May 2 01:37:42 1997


Dear Sirs,

My company is a manufacturer of Ultra-High Vacuum SPMs.
I wonder if you produce this product Torr Seal Epoxy Resin
or its analogue. Please contact me if you have anything
like this.

Regards,

Alexander Ivanov
Assistant Marketing Director
NT-MDT Co.

Alexander Ivanov <alex@ntmdt.zgrad.ru>
Russia - Fri Apr 25 09:49:32 1997


We are refinishing flooring in a Central Hospital Supply. Existing floor has epoxy surface. We need to add coat of epoxy to restore it. Floor is concrete floor slab. Please suggest which epoxy to use.
Thanks.

John R. Bouma
Fairfax, VA USA - Wed Apr 23 10:51:17 1997


Hi No Question, just writing to say hi.

-Jay & Kevin

Jay and Kevin Pelletier <MPellet414@AOL.com>
USA - Mon Apr 21 16:14:29 1997



Dear Sir,
I am in the search of Epoxy Injection for concrete
basement wall repair. I am somewhat familiar
with the 300 and 200 style injection, utilizing a
two part cartrige and plastic tubes that fasten over
the crack. I would not want to put you out any,
but if you could please forward anything that
might help me in this endeavor I would sincerely
appreciate it.

Respectfully submitted,
Thomas A. Sappington


St. Louis, MO USA - Thu Apr 17 22:09:16 1997


I'm looking for a Novolac resin that is Amine cured.
Michael J. Morrow
Albuquerque, NM USA -


I am searching for a livestock water tub sealant. The tubs are steel sided with a concrete bottom. I have problems with leaks in the concrete bottom and also at the seams where the concrete and steel meet. Do you recommend your product?? Thank you.
Don Schutz
Wagon Mound, NM USA -


Just found this spot today.
Robert Decloedt <nwp@eagle.wbm.ca>
Saskatoon, SK Canada -


Need a vinylester resin supplier in Cleveland area.
Im experimenting with saturating kraft paper liner
board .050" applying 5 oz fibreglas and then wet
forming to produce conceptual art resmbling massif
sculptures. I am allergic to other resins.

GENE GARGASZ
ELYRIA, OH USA -


IUS specializes in refurbishments and upgrades for the
hotel industry. We are currently covering the East coast
soon to expand nation wide. We are interested in located
a product that we can offer our current customer base,
and future customer base, in the area of flooring upgrades,
and flooring systems for new construction. We are very
intrested in recieving any type of literature that that
your company may offer. A timely response would be very
much appriciated. We are planning to expand into this
area as soon as possible.

Thank you,
James Pittelko


Interested in contacting companies for various concrete resurfacing product for marketing/sale in India, especially polymer based. Are in Civil construction business for last 25 years.
Dhiren Vadgama <>
Bombay, India -


Dear Sir:

I would like to inquire about Epoxy to be used for wood.
This is to be used for combining and compacting waste
agricultural products so it can be a substitute for wood.
Please reply thru my email listed above.

Thank you very much.

jigs j. gabor
Manila, Philippines -




John Kunka
THUNDER BAY, ON. CANADA -


Am a shop teacher--trying to construct a wooden boat
with my students and the plans call for Micro Baloon
filler. need help location filler for beat.
Thanks
Mike Fischer

Mike Fischer <fischerm@ten-nash.ten.k12.tn.us>
Lawrenceburg, TN USA -


I have 18 yrs. experience in industry.

Am currently seeking employment.

Please E-mail back if there is interest on your side.

Sincerely,

Jeff

jeffrey zavrl <bokfu@calweb.com>
Citrus Heights, Ca. USA -


Very good site design. I hope you respond to your email.
Leigh Davis <pontotoc@ix.netcom.com>
Memphis, TN USA -


looking for information franchise opportunity,if one exists
looking for supplier of material,if you are one

joe brasher <>
davison, mi USA -


My company would like to sample your products for possible usage in our future products.
We require epoxy with very strong bonding characteristics.

Adam miller <>
minneapolis, mn USA -


Great Site!

erik adlersparre
victoria, bc CANADA -


Good informations about epoxy. will visit yours site often. keep it's up...
Ricky Koh <rickykoh@pacific.net.sg>
Singapore -


Looking for chemical resistant flexable high build coating that likes rusty steel surfaces.
Bob Erbisch Rainbow Mountain Services
Fruita,, co. USA -


I have a new catalyst system, called Hycat-2000, for
low temperature epoxy cure. Any interest?

R. Rindone

Renato Rindone <>
Fair Oaks, CA USA -


Very Good and informative page.
Roger Bellido Jr <rbellido@pananet.com>
Panama, Panama -


I have developed a range of chemically inert, mechanically flexible, aquaphilic and fire retardent epoxy systems for use in a variety of applications. My company is looking for well established companies to take on the marketing,manufacture, and distribution of the products in several world-wide locations.
If your company is interested in our innovative products, please contact me in the first instance. The products have been developed in the States and we anticipate the States market to be the initial testing ground for the products prior to extending our operations further afield

DR JONATHAN HUGHES <>
BRISTOL, UK -


Interested in epoxy coatings over plywood used for
sidings of RV house trailers.

John May <j-may@juno.com 72560,2130@compuserve.com>
Sylmar, CA USA -


I am interested in a sulfuric acid (15.5%) proof coating or concrete type material

George Venturini
NJ USA -


Don Grosz (N/A) writes at Tuesday, 13-Aug-96 15:11:37 EDT:

96.08.13 Inquiry! I am looking for a list of U.V. Windshield repair resin manufacturers and would appreciate any help in finding this information. Please mail information to: Don Grosz P.0. Box 757 Haileybury, ON Canada P0J 1K0 Thank You!


Dave Bosell dbosell@paloverde.com writes at Wednesday, 28-Aug-96 20:06:46 EDT:

Nice pages. Lots of information. I appreciate the speedy response to e-mail.


casey hamilton, staff resources ,inc staffres@cetlink.net writes at Wednesday, 04-Sep-96 07:57:01 EDT:

stopped by while searching for engineers with expertise in resins, pultrusion, molding etc. nice setup, very user friendly for newcomers like us, enjoyed the visit.


Vincent Soh ( hayward@singnet.com.sg ) writes at Thursday, 19-Sep-96 11:38:01 EDT:

I see you are constantly upgrading the 'Page'. Gee! lots of effort and time. Well, thanks a lot. Can we mirror your page in singapore? Thanks for the great Job done at Resin Home Page. cheers!


Mark Adell ( ) writes at Saturday, 09-Nov-96 09:57:04 EST:

I am looking for a product to fill
in hairline cracks in my paitio.
I Need it to blend into exposed
aggragate. I am hoping to do it so
it is not noticable.
It was my fault in not allowing enough
expansion joints.
Thanks,
Mark


Dhirendra Vadgama () writes at Saturday, 21-Dec-96 11:40:35 EST:

Interested in dealing in specialised Epoxy based flooring systems for Indian market. Sourcing suppliers.


John M Sherwood ( ) writes at Friday, 17-Jan-97 20:39:17 EST:

We are primarily involved with the
installation of resinous flooring,
secondary containment and trench linings.
G. Marlow is a small, family owned
business about 6 years ago.


kate spade outlet louis vuitton outlet Lebron 11 coach factory sport blue 6s michael kors uk cheap jordan shoes louis vuitton outlet sport blue 3s jordan 6 sport blue Michael Kors Outlet retro jordans for sale lebron 12 coach factory outlet lebron 11 sport blue 6s jordan 6 sport blue jordan 3 wolf grey foamposites for sale kate spade outlet

Exclaim

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information on Epoxy.com Products please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont
USA

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director
                          sales@epoxy.com

 352-533-2167  Technical Support
                         Norm Lambert, President - Technical Support Director 
                         info@epoxy.com
  
352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

Website:  www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright 1994-2014 (providing online information about the right product for the right job for 20 years) EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  (hereinafter known as "Supplier" warrants its products (when properly stored) for the period of time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylate  and Polyurethanes Six (6) months.  Supplier warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Supplier. If any product fails to meet this warranty, the liability of Supplier will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Supplier within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Supplier may in its discretion refund the price received by Supplier in lieu of replacing the material. No customer, distributor, or representative of Supplier is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Supplier. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Supplier reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by us in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

 

[Home] [Catalog of Products [MSDS in Acrobat Format]  [Online Ordering Authorization Form] [Add Epoxy.com to Favorites]

Hit Counter