Epoxy.com? LasticD Flooring Decorative Resilient Flooring
GENERAL DESCRIPTION Epoxy.com LasticD Flooring is a fluid applied flexible resilient decorative colored quartz flooring system for concrete and wooden floors. The resiliency of Epoxy.com LasticD Flooring provides sound-deadening qualities and cushioning under-foot. Epoxy.com LasticD Flooring has excellent adhesion, abrasion resistance, impact and good chemical resistance. The surface characteristics of Epoxy.com LasticD Flooring can be varied to accommodate the degree of skid resistance, appearance, and chemical resistance. APPLICATIONS
ADVANTAGES
SURFACE PREPARATION Surface must be clean and sound. Remove all dirt, laitance, grease curing compounds and other foreign matter by sandblasting, or mechanical abrasion. Remove water and dust from all surfaces with an oil-free blast immediately prior to application.
MIXING AND APPLICATION INSTRUCTIONS For smooth installation with Urethane Membrane: Mix Epoxy.com Elastomeric Membrane according to instructions and apply at a spread rate of 50 square feet per gallon. Back roll with a spiny roller as required to release the air.For smooth installation with Flexible Epoxy: Mix Epoxy.com Flexible Epoxy according to instructions and apply at a spread rate of 50 square feet per gallon. Back roll with a spiny roller as required to release the air. For anti-skid installation: Mix Epoxy.com Flexible Epoxy according to instructions and apply at a spread rate of 120-130 square feet per gallon. Broadcast sand to excess while membrane is still wet. Allow to cure. Sweep and vacuum up excess. Sand if required and re-vacuum. Top-coating: Apply appropriate finishing coat according to instructions Mix Epoxy.com Elastomeric Membrane according to instructions and apply at a spread rate of 50 square feet per gallon. Back roll with a spiny roller as required to release the air. For smooth installation with Flexible Epoxy: Mix Epoxy.com Flexible Epoxy according to instructions and apply at a spread rate of 50 square feet per gallon. Back roll with a spiny roller as required to release the air. For anti-skid installation: Mix Epoxy.com Flexible Epoxy according to instructions and apply at a spread rate of 120-130 square feet per gallon. Broadcast sand to excess while membrane is still wet. Allow to cure. Sweep and vacuum up excess. Sand if required and re-vacuum. Top-coating: Apply appropriate finishing coat according to instructions.
LIMITATIONS
SAFETY PRECAUTIONS Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.
CLEANING All tools and equipment should be cleaned before the system gels. Use MEK, Acetone, or any lacquer solvent.
Standard Colors -- White, Light Gray, Dark Gray, Taupe, Sand, Old Gold, Mocha, Brick Red, Slate Blue, Colonial Green, Deep Blue, Black, Safety Yellow View this file in Acrobat format for easy printing of submittal quality tech data sheets!
|
|