Epoxy CR-ME Flooring

Chemical Resistant - Mechanical Equipment Room Flooring

GENERAL DESCRIPTION

Epoxy.com CR-ME Flooring is a fluid applied chemical resistant flexible resilient flooring system for concrete floors in mechanical equipment rooms. The resiliency of Epoxy.com CR-ME Flooring provides sound-deadening qualities and cushioning under-foot. Epoxy.com CR-ME Flooring has excellent adhesion, abrasion resistance, impact and high chemical resistance. The surface characteristics of Epoxy.com CR-ME Flooring can be varied to accommodate the degree of skid resistance, appearance, and chemical resistance.

APPLICATIONS

Aisle Ways

Assembly Plants

Bakeries

Basement Floors

Bottling Plants

Break Rooms

Cafeterias

Canning Plants

Car Washes

Cells

Chemical Storage Areas

Chemical Processing Areas

Church Floors

Classroom Floors

Corridors

Educational Facilities

Entrances

Farms

Food Plants

Fork Lift Areas

Health Care Facilities

Hospitals

Kennels

Kitchens

Laboratories

Law Enforcement Facilities

Laundries

Leveling concrete

 Loading docks Locker Rooms

Machine Shops

Manufacturing Areas

Marine Surfaces

Meat Preparation Areas

Mortuaries

Nuclear Plant Floors

Offices

Patching concrete

Photography Processing Areas

Power Plants

Printing Plants

Produce Preparation Areas

Pool Decks

Poultry Plants

Ramps

Research Facilities

Rest Rooms

Restaurants

Semiconductor Plants

Sewer Plants

Shop Floors

Shopping Centers

Shower Rooms

Store Floors

Show Rooms

Supermarkets

Veterinary Facilities

Water Plants

Warehouses

& many others

ADVANTAGES

SURFACE PREPARATION

Surface must be clean and sound. Remove all dirt, laitance, grease curing compounds and other foreign matter by sandblasting, or mechanical abrasion. Remove water and dust from all surfaces with an oil-free blast immediately prior to application

MIXING AND APPLICATION INSTRUCTIONS

For smooth installation with Urethane Membrane: Mix Epoxy.com Elastomeric Membrane according to instructions and apply at a spread rate of 50 square feet per gallon. Back roll with a spiny roller as required to release the air.

For smooth installation with Flexible Epoxy: Mix Epoxy.com Flexible Epoxy according to instructions and apply at a spread rate of 50 square feet per gallon. Back roll with a spiny roller as required to release the air.

For anti-skid installation: Mix Epoxy.com Flexible Epoxy according to instructions and apply at a spread rate of 120-130 square feet per gallon. Broadcast sand to excess while membrane is still wet. Allow to cure. Sweep and vacuum up excess. Sand if required and re-vacuum.

Top-coating: Apply appropriate finishing coat according to instructions.

LIMITATIONS

  • Substrate must be sound clean and properly prepared
  • Substrate temperature must be a minimum of 50° F for proper cure.
  • Concrete should be 28 days old prior to installation

    • SAFETY PRECAUTIONS

    Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.

    CLEANING

    All tools and equipment should be cleaned before the system gels. Use MEK, Acetone, or any lacquer solvent.

    TECHNICAL DATA

    Weight

    3/32 - 1/8 inch

    0.7-1.0 pounds / sq. ft.

    Water Absorption

    ASTM D-570

    Nil

    Elongation (Membrane only)

    ASTM D-412

    350-400%

    Tensile Strength

    ASTM D-412

    1200-1500 P.S.I

    Bond Strength

    ACI Comm #403

    250-300 p.s.i concrete fails

    Tear Strength

    ASTM D-601

    80 p.s.i

    Thermal Shock Resistance

    ASTM C-884

    Passed

    Impact Resistance

    MIL D-3134F

    16 foot-pounds no break in specimen

    Service Temperature

    Degrees F.

    -40 to +180 degrees F.

    Standard Colors: White, Light Gray, Dark Gray, Taupe, Sand, Old Gold, Mocha, Brick Red, Slate Blue, Colonial Green, Deep Blue, Black, Safety Yellow