[Epoxy Home] [Catalog of Products] [Where to Start] [Guide Specs] [Epoxy Installation Guides] [Blog Posts] [Epoxy Bonding Systems] [Chip Floors] [Chemical Resistant Epoxy] [Seamless Coatings] [Conductive Epoxy Flooring] [Crack Injection of Concrete & Wood] [Applications] [Elastomeric Polyurethane Systems]  [Seamless Garage Flooring Resins] [High Temperature Epoxy Resins] [Seamless Industrial Floors] [Joint Systems & Sealants] [Methyl Methacrylate MMA ] [Novolac Epoxy Resins] [Epoxy Mortars & Grouts] [Epoxy Novolac] [Primers Sealers] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Epoxy Installation Tips] [Who We Are]  [Epoxy Tech Data Sheets in Acrobat] [Product MSDS Sheets] [Online Order Authorization Form][Contact UsPhone 352.489.1666

  Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980Contact Us  

 


Epoxy.com™ Epoxy Mortar STD
Product #9
100% Solids Standard Epoxy Mortar


GENERAL DESCRIPTION

Epoxy.com Epoxy Mortar STD uses 100% solids Epoxy with graded aggregates. Urethane and Epoxy finish coats provide specific performance characteristics as needed

Epoxy.com Epoxy Mortar STD is a resin patching, flooring, and/or repair system consisting of 100% solids epoxy resin and aggregates which provide heavy-duty protection at 3/16" to 1/4". When grouted an sealed, Epoxy.com Epoxy Mortar STD eliminates porosity and produces a dense, skid-inhibiting finish that will minimize dirt and chemical penetration.

Epoxy.com Epoxy Mortar STD can also be installed with a conductive system for dispassion of static electricity in areas that are subjected to physical abuse and moderate to heavy wear and impact.

Epoxy.com Epoxy Mortar STD is trowel applied and can be used to form an integral cove base where specified. It has good chemical resistance and is designed for high impact and heavy duty use.

Epoxy.com Epoxy Mortar STD (HP) is the High Performance Mortar exhibiting excellent chemical resistance and utilizes Epoxy.com Product #2 Chemical resistant Resin or Epoxy.com Product #630 Novolac Epoxy for maximum resistance.

ADVANTAGES

  • Will Not Support Growth of Fungus or Bacteria

  • High Impact and Wear Resistant

  • Chemical Resistant

  • Thermal Shock Resistant

  • Hand or Power Trowel Applied

 

SURFACE PREPARATION

Surface must be clean and sound. Remove all dirt, laitance, grease curing compounds and other foreign matter by sandblasting, shot blasting, or mechanical abrasion. Remove water and dust from all surfaces with an oil-free blast immediately prior to application.

 

MIXING AND INSTALLATION INSTRUCTIONS

Roll or squeegee a prime coat. Trowel apply mortar to desired thickness. Grout and Top Coat as needed to achieve required finish and texture.

Do not use in temperatures below 55 degrees F, as cooler temperatures delay hardening. Substrate must be free from hydrostatic pressure, moisture transmission, curing agents and other foreign materials. Urethane seal coats are recommended for areas exposed to intense sunlight. Allow 16 hours for initial set of mortar. Seal Coat time may vary.

SAFETY PRECAUTIONS

Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.

 

CLEANING

All tools and equipment should be cleaned before the system gels. Use MEK, Acetone, or any lacquer solvent.

 

APPLICATION PROPERTIES @77 DEGREES F

Mix Ratio 4:1 by volume
Color Clear, Standard Colors,

Color matching also available

Initial Cure 16 hours
PHYSICAL AND PERFORMANCE PROPERTIES
Compressive Strength (ASTM D-695) 13000 p.s.i (neat resin)
Ultimate Tensile Strength (ASTM D638) 4200 p.s.i (neat resin)
Tensile Elongation (ASTM D-638) 6-8% (neat resin)
Flexural Strength (ASTM D-790) 7800 p.s.i (neat resin)
Flexural Modulus (ASTM D-790) 2.5 x 105 P.S.I
Tensile Strength (ASTM C-307) 2400 p.s.i
Weight at 1/4 inch thick 2.0 - 2.5 #/sq. ft.
Adhesive Strength (Mil D-24613) 420 p.s.i
Adhesion to Concrete (ACI Committee 403) 300 p.s.i (Concrete Fails)
Hardness Shore D (ASTM D-2240) 80-84
Water Absorption (MIL D-24613) Nil
Abrasion Resistance (ASTM C-501) 50 mg
Impact Resistance (MIL-D-3134F SS 4.7.4 Withstands 16 ft/lbs without cracking, delaminating, or chipping.
Compressive Strength (ASTM C-579) 14000 p.s.i @ 7 days
Flexural Strength (ASTM C-580) 4,200 p.s.i
Coefficient of Friction (ASTM D-2047) 0.80
Thermal Coefficient of Expansion

(ASTM C-531)

26 x 10-6 in/in/degree F.
Thermal Shock Resistance (ASTM C-884) Passed
Fungus & Bacteria Resistance

(Mil -F-52505 SS4.4.2.11

Will not support growth of fungus or bacteria when subjected to mildew and bacteria tests specified in TT-P-34

 

 

Exclaim

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information on Epoxy.com Products please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont
USA

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director
                          sales@epoxy.com

 352-533-2167  Technical Support
                         Norm Lambert, President - Technical Support Director 
                         info@epoxy.com
  
352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

Website:  www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright © 1994-2014 (providing online information about the right product for the right job for 20 years) EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  (hereinafter known as "Supplier" warrants its products (when properly stored) for the period of time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylate  and Polyurethanes Six (6) months.  Supplier warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Supplier. If any product fails to meet this warranty, the liability of Supplier will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Supplier within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Supplier may in its discretion refund the price received by Supplier in lieu of replacing the material. No customer, distributor, or representative of Supplier is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Supplier. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Supplier reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by us in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

 

[Home] [Catalog of Products [MSDS in Acrobat Format]  [Online Ordering Authorization Form] [Add Epoxy.com to Favorites]

Hit Counter