Product #120 is a modified latex liquid admixture to improve the bond of Portland cement concrete toppings, thin-sets, patches, leveling courses, slush coats, stucco; and to improve the "hang" of vertically applied flash coats. Product #825 Epoxy Floor Sealer is a non-rewettable, polymer emulsion formulated for use with fast or normal setting floor underlayments. Product #1000 fast setting Mortar with Migratory Corrosion Inhibitor is a one component trowelable patching mortar designed for overhead and vertical use. Product #1000 is a special blend of fiber reinforced fast setting cement with silica fume, polymeric compounds and aggregates which achieves structural properties in a short time. It is ready to use with just the addition of clean water which activates the modified cement mortar. Product #1001 fast setting Fiber Reinforced Mortar - Two Component Fiber Reinforced Mortar is composed of polymer resin, selected plasticizers, cement, synthetic fibers and aggregates. Product #1001 is conveniently packaged in a two part unit to produce the ultimate in bond, compressive strength, and impact resistant properties for a repair mortar Product #1004 Self Leveling Floor Topping - is a one component copolymer modified cementitious topping. It is ready to use with only the addition of clean water to activate the polymer modified cement topping. It has a special blend of plasticizers to provide zero shrinkage, high flow and bonding properties necessary for floor topping. 1005 Rapid Set MORTAR is a non-shrink cementitious blend with exact ratios of graded siliceous aggregates and other ingredients that produce a strong, durable, rapid repair and resurfacing product. PRODUCT #1005 is easy and fast to use and has excellent durability and workability. PRODUCT #1005 is ready to use, simply add potable water and mix to desired consistency. PRODUCT #1005 is specifically formulated and manufactured to meet Maryland DOT Class II, Type II rapid setting mortar or concrete. Product #1008 Rapid Hardening Polymer Repair Mortar is a one component polymer modified, shrinkage-compensated cement-based mortar. It is designed for horizontal concrete surfaces where high early strength gain is required. The blend of special cements, aggregates, fibers and polymers produce a highly durable mortar or concrete in a short time.
|
|