Epoxy.com - Selecting the Right Resin System


[Home][Catalog of Products][Where to Start][Bonding Systems][Chip Floors][Chemical Resistance][coatings][Conductive][Applications]
[Elastomeric Polyurethane Systems] [High Temperature] [Industrial Floors][Injection][Joint Systems & Sealants] [Mortars / Grouts]
[Polymer Systems][Primers Sealers][Misc.][Seamless Flooring][Waterproofing][Dealers Wanted][Installation Tips][Product Guide]
[Wood Filler][Who We Are][FAQs][Guest Book][Guide Specs][Tech Data Sheets in Acrobat Format][MSDS in Acrobat Format]
[Online Ordering Authorization Form]

 


We have over 300 products, that can be used in combination to produce a multitude of systems. If you don't find it here contact us and see if we can make a custom product for you.

The Technical Support and Development of Our Products are Backed with Decades of Field Experience!

Here is the fast track to navigating our site:

Epoxy Coating a Water Tank - LEFT CLICK to see this picture in full size.
Click the thumbnail pictures below to enlarge them.

 

Here are some links to our most popular pages:

Since 1980 we have added over 300 products.  You can find a complete listing of these products at www.epoxy.com/products.htm. If you cannot find it please give us a call.

  • Chemical Resistance - All of our epoxy products have good chemical resistance.  But some chemical applications are harder than others.  We have a wide range to suit your needs. These products protect your floors, structures and the environment. The wide range of epoxy, polyurethane, and Methyl Methacrylate products will insure you get the protection you need in the most cost effective way.
  • Bonding Systems - Epoxies and epoxy like products are perhaps the best, easy to use adhesive in existence. They can be used to bond a wide range of materials.
  • Epoxy Injection of Concrete and Wood - One of the most versatile, problem solving products available in epoxy systems today is Epoxy Injection. Structural restoration of concrete by epoxy injection is very often the only alternative to complete replacement. It therefore results in large cost savings. Epoxy injection protects the rebar and stops water leakage.
  • Elastomeric Systems - We have a wide range of elastomeric decking/flooring and joint systems. Elastomeric Decking systems is used in exposed areas to create waterproof walking areas.  Elastomeric waterproofing systems are used for below grade waterproofing.  It is also used for waterproofing under tile, in water tanks, and a host of other non-exposed waterproofing applications. Most of these products are epoxy or urethane based products. 
  • Industrial Flooring - The demands of industrial flooring is as different as the products made by our industrial customers.  We have a wide range of Industrial Flooring products, to fit the needs of most industries.  In selecting your products for different kinds of environments, Epoxy.com Tech Service Department, can be very helpful.  Call on them as often as you need to, to make the right choices. We offer Epoxy, Methyl Methacrylate, Polyurethane and other polymeric flooring systems.
  • Polyester Wood Filler Epoxy.com Polyester Wood Filler is a two component, wood like polyester filler paste. Quick setting and easy to use. Epoxy.com Polyester Wood Filler is designed primarily for wood model shops for making permanent repairs, fillets, and design changes in the construction of all wood models and patterns.
  • Polymer Systems - Polymer modifiers and Polymer Modified Mortars and Overlays.
  • Epoxy Casting Resin - Product #214 is an all-purpose, low viscosity Epoxy System for coating wood and concrete counter tops, tabletops, bar tops and similar applications. It is commonly used as a clear self-leveling flooring material, where an extremely flat and level floor is required over concrete and wood.  Also used as a clear adhesive matrix for specialty colored glass and colored aggregate flooring and tiles. Product #214 forms a glossy, hard surface, which is resistant to stains. Product #214 has excellent clarity and color retention. It is essentially odorless and can therefore be used in occupied area
  • ultra pure water tank coatings (RODI).  We have had extensive experience in this special kind of tank lining.
  • Epoxy Garage Floors - Learn about all the various kinds of Epoxy Garage Floor Systems for your garage.
  • NEW Coating Installation Guide - Installation Procedures for typical roller coating installation of epoxy.
  • NEW Coatings Calculator - An easy to use way to figure out how much epoxy primer and coating that you need for your application.
  • Frequently Asked Questions (FAQs) about Epoxy.
  • Post to our guest book
  • Read our guest book
  • Norm Lambert, (President of Epoxy Systems, Inc.)  Home Page.
  • Search this site by your search term from here. If you prefer the help of a human to help you search for your product, contact Epoxy.com  Technical Support Department.
Epoxy.com Chip Seamless  Flooring - in a water plant. - LEFT CLICK to see this picture in full size.

Polyurethane Decking System Epoxy.com System 450x2 on a boat dock. LEFT CLICK to enlarge this image

Urethane Injection of Water Reservor Roof Epoxy.com Product #4 - LEFT CLICK to view larger image

Close up of Epoxy.com Chip Seamless Flooring - RIGHT CLICK TO ENLARGE PICTURE

Joint System - Epoxy.com Product #63 Epoxied into Water Reservoir Roof with Epoxy.com Product #6

Epoxy.com Chip Seamless  Flooring - Vermont Highway Rest Area - LEFT CLICK to ENLARGE

 

Epoxy.com a division of Epoxy Systems, Inc. brings you "The Right Product for the Right Job".  Since 1980 we have developed a product line of over 300 resinous and related products.  We have decades of field experience to back these products up.  Below is a partial listing of some of Epoxy.com latest products.  For a complete list of Epoxy.com Products please visit www.epoxy.com/products.htm

Specific Products of Special Interest:

Epoxy Tile Grout - Epoxy.com Product #225  - Water Cleanable Tile Grout and Adhesive- LEFT CLICK to ENLARGE - Photo by Countertops by Porter


Photo by:
Countertops by Porter

Polysulfide Joint Sealant- Epoxy.com Product 913  - Duel Component Joint Sealant LEFT CLICK to ENLARGE

 

 

 



Photo by:
Epoxy.com

Epoxy.com Products Pallet of Products

 

 

  • PRODUCT #39 Silane Penetrating Sealer is a one component water based silane that provides excellent protection to concrete surfaces against attack from wet/dry, freeze/thaw cycles, and de-icing chemicals. PRODUCT #39 imparts a hydrophobic "water-shedding" effect to concrete, masonry, brick, stone & wood surfaces. The water repellency helps reduce cracking spalling, chemical degradation, biological growth, efflorescence, and dirt pick- up. PRODUCT #39 is easy to use and meets all current VOC regulations.
  • PRODUCT #41 Silane Penetrating Sealer is a one (1) component sealer that provides excellent protection to concrete against attack from wet/dry, freeze/ thaw cycles, and de-icing chemicals. EPOXYSYSTEMS PRODUCT #41 provides a hydrophobic "water-shedding" effect to masonry surfaces. EPOXYSYSTEMS PRODUCT #41 is a penetrating sealer that is repellent to liquid water but permeable to water vapor: a "breathable" coating.
  • Epoxy.com Product #100 uses a unique epoxy technology which allows the contractor to install epoxy systems on new concrete (4-5 days old) without fear of moisture entrapment. Epoxy.com Product #100 Exhibits greater than 100 times the permeability of standard epoxy slurries and mortars. Product #100 is used as a base for Epoxy.com Chip and Quartz systems and as a binder for Epoxy.com Resinous Mortar Systems, when moisture is a concern.
  • Product #115 Epoxy System for modifying concrete is a two component, 2:1 ratio, 100% solids, liquid epoxy resin system.  It can be added to conventional concrete or mortar mixes to produce high strength, epoxy modified concrete or mortar mix.
  • Epoxy.com Product #210 Coal Tar Epoxy  is a two component, 100% Solids Epoxy coating especially formulated for high build applications. It produces a tough, flexible, chemical and impact resistant film.  It is formulated to be easily spray applied as thick as 40 mils in 1 coat.  It provides excellent resistance to aggressive water, acids, and caustics. Suitable for intermittent exposure to 300 degrees F.
  • Epoxy.com Product #223 - Water Based Epoxy Curing Sealing and Bonding Agent is a two component water based epoxy curing that is used to both cure and seal concrete and to bond freshly placed concrete to existing concrete.  It is ideally suited as a cure and seal for freshly placed concrete.  Its chemical resistance makes it ideal to seal: stamped concrete, acid stained concrete, concrete countertops, parapet walls, bridge pier caps, sealing floors in food processing areas, or any other area that requires a durable, chemical resistant concrete sealer.
  • Product #225 Water Cleanable Epoxy Mortar Kit - is a user friendly, water cleanable, 100% solids epoxy grout and adhesive. Used for grouting ceramic tile, brick pavers, and stone, it is supplied in pre-packaged kits containing resin, hardener, and (in the Product #225 Kit) mineral fillers that produce a dense, uniform seal. Typical applications for #225 require resistance to thermal shock, chemicals, and heavy traffic including meat packers, breweries, canneries, bottlers, CIP areas, and pharmaceutical formulators.
  • Epoxy.com PRODUCT #312 Aliphatic Sprayable Polyurea Coating is a two component sprayable aliphatic polyurea. It dries in seconds to provide a tough chemical and abrasion resistant coating. As an aliphatic polyurea, PRODUCT #312 is color fast and will resist yellowing from Ultra violet light exposure. Typical working times of one minute or less can be expected. This fast reaction requires a fast, efficient mixing technique so that the mixture can be applied within the short gel times. Impingement mixing from available two-component spray machinery is efficient and entirely adequate.
  • Epoxy.com PRODUCT #400 Chemical Resistant Urethane is a two component, chemical resistant, polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and superior color retention.  It can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors.  It is used as a finish coating option for most Epoxy.com Flooring Systems.
  • Epoxy.com Product #431 is a two component, flame retardant foam especially manufactured to provide a rigid foam with physical properties similar to that of timber or cement grouts, at a convenient one to one ratio, A to B, light black in color. Product #431 will bond to wet, moist or dry surfaces, even to Plexiglas, with no shrinkage and ample pot life after mixing A & B components.
  • Epoxy.com System #485 is an Elastomeric Urethane Membrane System, that is liquid applied.  System #485 Elastomeric Membrane System is seamless, elastomeric (flexible), and UV.  These qualities make it an excellent choice for outside applications in direct sun and weather, where water tightness, durability, and excellent appearance is required. Its elastomeric properties will allow horizontal movements up to 1/8 inch without breaking. Epoxy.com System #485 has excellent abrasion and chemical resistance.  The surface of System #485 can be varied to achieve the required anti-skid and decorative look.

  • PRODUCT #640 Chemical & Heat Resistant Coating is a two component; 100% solids brush, roll or airless spray applied coating designed to provide cavitation, corrosion and erosion resistance to concrete, metallic and nonmetallic surfaces. PRODUCT #640 acts as an inert barrier against extremely harsh environmental factors such as low and high PH, temperature extremes, dry and fluid particulate flow and corrosive chemical attack.
  • 648 Chemical Resistant Coating  is a two component high performance epoxy resin formulated with a convenient 1 to 1 mix ratio. EPOXYSYSTEMS PRODUCT #648 Chemical Resistant Coating has been developed as a coating for exposure to organic acids and other severe chemical environments. It is used widely in the food and chemical industries for protection of concrete, wood, and steel. EPOXYSYSTEMS PRODUCT #648 is suitable for application by brush, roller or spray. Where in-shop production techniques may be utilized and elevated temperature curing is feasible, rapid property development may be achieved by curing at 200 - 250F (93 - 121C). This will provide a cured film which may be handled within a relatively short period of time (about 4 hours). Elevated temperature curing will also enhance ultimate physical and chemical resistant properties.
  • Product #672 Conductive Epoxy is a two component, 100% solids epoxy/aggregate material that utilizes the latest in conductive floor technology. Epoxy.com CONDUCTIVE EPOXY can be installed as a coating or as a component to Epoxy.com Flooring Systems. It can also include Epoxy.com  ELASTOMERIC MEMBRANES to produce waterproof, crack resistant Systems. Typical Uses of include: Ammunitions Facilities, Paint and Solvent Storage Areas, Electronic Component Plants Hazardous Materials Storage Areas
  • Epoxy.com PRODUCT #674- Electrostatic Dissipative Urethane Coating   is a two component, Electro Static Dissipative chemical resistant, polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and superior color retention. Epoxy.com PRODUCT #674 can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangars, animal housing, and vehicle maintenance facilities. Available in both clear and pigmented formulations, Epoxy.com PRODUCT #674 is used as a finish coating option for most Epoxy.com Flooring Systems.
  • Product #720 Cove Base Binder - can be used to install an integral cove base for most Epoxy.com  Flooring Systems, to provide seamless wall to floor protection.
  • Product # 845 Penetrant & Prime Coat -  is a 100 % solids, low viscosity, epoxy primer for use on steel, concrete or wood. The low viscosity and special adhesion promoters make it an excellent penetrate of rusted steel or concrete. Epoxy.com Product #845 acts as an inert barrier, resistant to impact, acids, caustics, solvent and thermal shock. The tough water proof surface is excellent for subsequent coatings. Penetrates and reinforces rusted steel surfaces. Cures under high humidity. Solvent free; 0.0 lbs. VOC. Good abrasion, heat and impact resistance. No blush or exudation.
  • Epoxy.com PRODUCT #1800 Fast Setting Brushable Polyurea Coating is a two component brushable aliphatic polyurea. It cures in minutes to provide a tough chemical and abrasion resistant coating. This reaction is very fast, with typical working times of less than 15 minutes. Epoxy.com PRODUCT #1800 is recommended for use in areas such as tanks, cooling tower linings, water and wastewater and waterproof deck coatings. It can be used in food and beverage cold storage areas, mechanical rooms, industrial plants, chemical and fertilizer plants, pulp and paper mills and petrochemical facilities.
  • EPOXY.COM PRODUCT #1009 Repair Mortar is a polymer modified cement-based topping. It is ideal for leveling and or resurfacing distressed, rough and/or uneven concrete floors. It is easy to use. Add potable water at the jobsite.

  • Please see  for a complete listing of Epoxy.com current products go to www.epoxy.com/products.aspx . If you don't see it there please contact Epoxy.com Technical Support Department to see if we can make a product for you.
  • NEW Need help in calculating the quantities that you need.  Try our List of  Epoxy Calculators.

You can can authorize your credit card order online at: https://www.epoxy.com/orders This link can also be used from your web enabled cell phone.

If you are looking for information, when you are in the field and have a web enabled cell phone you can view our most popular products at:www.epoxy.com/wireless/
 
We like still like the human interface, so at least at the beginning you will want to place orders by calling us at
321-206-1833
 
Picture of A Pail of Epoxy

Exclaim

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information on Epoxy.com Products please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont
USA

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director
                          sales@epoxy.com

 352-533-2167  Technical Support
                         Norm Lambert, President - Technical Support Director 
                         info@epoxy.com
  
352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

Website:  www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright 1994-2014 (providing online information about the right product for the right job for 20 years) EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  (hereinafter known as "Supplier" warrants its products (when properly stored) for the period of time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylate  and Polyurethanes Six (6) months.  Supplier warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Supplier. If any product fails to meet this warranty, the liability of Supplier will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Supplier within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Supplier may in its discretion refund the price received by Supplier in lieu of replacing the material. No customer, distributor, or representative of Supplier is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Supplier. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Supplier reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by us in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

 

[Home] [Catalog of Products [MSDS in Acrobat Format]  [Online Ordering Authorization Form] [Add Epoxy.com to Favorites]

Hit Counter