[Epoxy Home] [Catalog of Products] [Where to Start] [Guide Specs] [Epoxy Installation Guides] [Blog Posts] [Epoxy Bonding Systems] [Chip Floors] [Chemical Resistant Epoxy] [Seamless Coatings] [Conductive Epoxy Flooring] [Crack Injection of Concrete & Wood] [Applications] [Elastomeric Polyurethane Systems]  [Seamless Garage Flooring Resins] [High Temperature Epoxy Resins] [Seamless Industrial Floors] [Joint Systems & Sealants] [Methyl Methacrylate MMA ] [Novolac Epoxy Resins] [Epoxy Mortars & Grouts] [Epoxy Novolac] [Primers Sealers] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Epoxy Installation Tips] [Who We Are]  [Epoxy Tech Data Sheets in Acrobat] [Product MSDS Sheets] [Online Order Authorization Form][Contact UsPhone 352.489.1666

  Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980Contact Us  

Epoxy.com PRODUCT #418

ELASTOMERIC MEMBRANE TWO-COMPONENT

WATERPROOFING SYSTEM

This Product is Replace By Epoxy.com Product #449


This Material requires a minimum product purchase. Please see our Products That Require a Minimum Order Page, or contact Epoxy.com for more information.

Epoxy.com PRODUCT #418, a black, self-leveling, liquid applied, two-component polyurethane system, designed to form a tough rubber membrane impervious to moisture.

Type I: For horizontal surfaces

Type II: For vertical surfaces

PRODUCT DESCRIPTION

Composition: Polyurethane elastomer. A two-component system, which does not depend on atmosphere moisture to cure.

Basic Uses: Once cured, Epoxy.com PRODUCT #418 allows expansion and contraction over a broad temperature range and maintains flexibility and waterproofing properties under continuous exposure to water above or below grade. Epoxy.com PRODUCT #418 has a thixotropic consistency and may be used on vertical as well as horizontal surfaces. Epoxy.com PRODUCT #418 remains flexible from -75o to 175oF.

Suggested areas of application are as follows:

Waterproofing in between slabs, such as parking decks, roof decks or courtyard areas over subterranean parking.

Waterproofing exterior walls or foundations and basements or other structures that are to be backfilled.

Waterproofing inside planter boxes.

Waterproofing under terrazzo or tile floors.

Waterproofing under shower pans, kitchen, laundry and bathroom floors.

Waterproofing of occupied areas under malls, plazas and promenades.

Water Tanks: Epoxy.com PRODUCT #418 has been used with outstanding success as a lining for emergency water storage tanks. The Epoxy.com PRODUCT #418 fills and covers the crack and because of its flexibility, allows them to move with changes in temperature. The product is firmly bonded to the substrate so water cannot flow underneath the lining as it does with sheet lining materials. The Epoxy.com Product #886 or #888 Primer must be used before applying the Epoxy.com PRODUCT #418.

Advantages:

Applied cold by spray methods, brush, roller, squeegee or trowel.

May be applied over concrete, stone, brick, cement blocks, wood, metal, asbestos and most other surfaces.

Epoxy.com PRODUCT #418 cuts cost of application by eliminating mixing, splicing, sealing tapes, adhesives and other labor consuming methods required when installing other conventional types of waterproofing systems.

The superior flexibility and elongation properties of Epoxy.com PRODUCT #418 allows expansion and contraction with the substrate, without cracking or becoming brittle.

Excellent adhesion, combined with the elastomeric qualities of Epoxy.com PRODUCT #418 makes the use of protective covering prior to backfilling unnecessary, unless the backfill material contains crushed rock. On in between slab applications, a protective board must be used.

Does not contain any potentially hazardous coal tar.

Color: Black only.

Standards: A.S.T.M. C836-76

 

PROPERTY TEST METHOD RESULTS

COLOR

A-COMPONENT -- BLACK

B-COMPONENT -- AMBER

VISCOSITY (POISE, @ 75OF) BROOKFIELD

A-COMPONENT VISCOMETER 30 +/- 5

B-COMPONENT 35 +/- 5

WEIGHT PER GALLON (POUNDS)

A-COMPONENT -- 9.40 9.60

B-COMPONENT 8.35 8.45

PERCENT SOLIDS -- 100%

MIXING RATIO (A:B) -- 1 : 1 (VOLUME)

POT LIFE (@ 75OF) -- 1 2 HR.

RECOAT TIME (@ 75OF) OBSERVED 24 HRS.

CURE TIME (@ 75OF) OBSERVED 48 72 HRS.

HARDNESS (SHORE A) ASTM D-2240 10A +/- 2A

TENSILE STRENGTH (P.S.I) ASTM D-412 200 +/- 20

ELONGATION (%) ASTM D-412 750 +/- 75

ADHESION TO PEEL (PLI) ASTM D-903 10

MOISTURE VAPOR

TRANSMISSION ASTM E-96 0.02 GR/HR/SQ. FT.

LOW TEMPERATURE ASTM C-836 PASS / NO CRACKS

FLEXIBILITY

LOW TEMPERATURE ASTM C-836 NO CRACKING

BRIDGING

HEAT AGING ASTM C-836 NO CRACKING

Hit Counter

Exclaim

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information on Epoxy.com Products please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont
USA

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director
                          sales@epoxy.com

 352-533-2167  Technical Support
                         Norm Lambert, President - Technical Support Director 
                         info@epoxy.com
  
352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

Website:  www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright 1994-2014 (providing online information about the right product for the right job for 20 years) EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  (hereinafter known as "Supplier" warrants its products (when properly stored) for the period of time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylate  and Polyurethanes Six (6) months.  Supplier warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Supplier. If any product fails to meet this warranty, the liability of Supplier will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Supplier within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Supplier may in its discretion refund the price received by Supplier in lieu of replacing the material. No customer, distributor, or representative of Supplier is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Supplier. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Supplier reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by us in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

 

[Home] [Catalog of Products [MSDS in Acrobat Format]  [Online Ordering Authorization Form] [Add Epoxy.com to Favorites]

Hit Counter