Chemical Resistant Resin Systems:
Epoxy, Polyurea, Polysulfide and Vinyl Ester Systems

All most all of our products can be used for chemical resistant applications.  Below is just a list of some of our major chemical resistance systems.

Chemical Resistance and Chemical Containment  

  • Epoxy - Chemical Resistant

    bullet Epoxy.com Product #2 Chemical Resistant Coating - a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Available in normal, fast, and Cold Temperature Cure.
    bullet Epoxy.com Product #2 Fast - Shorter Potlife, and faster setting version of Product #2 Chemical Resistant Coating
    bullet Epoxy.com Product #2 Cold Temperature Cure - This is a version of that sets even faster than Epoxy.com Product#2 Chemical Resistant Coating Fast. Typically used in colder temperatures, or where an very fast cure is required.
    bullet Epoxy.com Product #15 Chemical Resistant Flooring Resin - a two component, seamless 100% solids epoxy resurfacing system with High Chemical Resistance. It may be applied as a coating, or combined with silica sand or Epoxy.com multi-colored quartz aggregate to produce a durable, easy to maintain floor, on both new and old surfaces.
  • Novolac Epoxy - Highly Chemical Resistant

    • Epoxy.com Product #630 Novolac Epoxy Mortar (98% Sulfuric Acid Resistant) - is a 100% solids epoxy Novolac ideal for harsh chemical and solvent resistant applications. It is ideal for use as a troweled mortar, slurry binder, and coating for concrete and steel in extremely corrosive areas where resistance to 98% sulfuric acid or other strong caustics is needed. It   is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities.
    • Epoxy.com Product #633 Epoxy Novolac Coating is a 100% solids epoxy Novolac coating ideal for harsh chemical and solvent resistant applications. It is used in secondary containment, solvent storage, pump pads, trenches, and other high exposure areas. It is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. Product #633 is commonly used as a seal coat for Epoxy.com MORTAR SYSTEMS where chemical resistant performance is required. 
  • Vinyl Ester

    • Epoxy.com System #83 Vinyl Ester - use in a wide range of industrial applications. Epoxy.com VINYL ESTER SYSTEMS can be installed as a coating, slurry, or mortar to meet various chemical and heat resistance needs.
       
  • Joints

    • Epoxy.com Product #63 EVA Expansion Joint -   a water-tight cross-linked closed-cell Ethylene Vinyl Acetate expanded foam material that exhibits unique properties when used in expansion contraction joints. Epoxy.comâ„¢  Product #63 forms a water-tight cross-linked closed-cell Ethylene Vinyl Acetate expanded foam material that exhibits unique properties when used in expansion contraction joints. Epoxy.comâ„¢ Product #63 is water-tight and exhibits good chemical resistance properties to most mild non-oxidizing acids, alkalines and petroleum products.  
    • Epoxy.com Product #632 Novolac Control Joint Filler  is a 100% solids flexible Novolac epoxy Chemical Resistant joint filler for saw-cut joints of concrete slabs on grade.
 

Related links:

Epoxy Coating
Chemical Resistant, Epoxy Flooring
Epoxy Mortar Resin
High Chemical Resistance, Epoxy Coating)
Epoxy Polyamine Coating
Flake Flooring
High Temperature Epoxy
EVA Expansion Joint
Epoxy Novolac
Epoxy Novolac Coating
Vinyl Ester Systems

 

Here are some other useful product for chemical resistance:

Epoxy Primer
Oil Stop Primer