Question About Epoxy.com Seamless Flooring Products
Epoxy.com Seamless Epoxy Flooring - Insuring the Highest Quality Epoxy Installation
Below are some of the questions that have been emailed to Norm Lambert at
norm@epoxy.com and some of his answers.
Have a question for Epoxy.com? If so, please email Epoxy.com Technical Support.
Which Epoxy.com Seamless Epoxy Flooring is the best?
Q: "I would like to install a seamless epoxy floor.
Which Epoxy.com seamless epoxy floor system is the very best?"
Norm Lambert: The best Epoxy.com Floor is the
one that is right for you. Everyone's need is slightly different. That
is why Epoxy.com has many different types of seamless epoxy flooring.
Actually some of our seamless flooring is not epoxy at all. We also
compound aliphatic polyurethane and Methyl Methacrylate flooring and
coatings as well. Think of Epoxy.com Seamless flooring and coating
systems as a tool box full of tools. Our job at Epoxy.com
is to make sure you have the right seamless epoxy flooring product
for your needs. Don't settle for "One Size Fits All". Let us
help you pick out the material that is best for you.
I have a concrete mechanical room floor that I want to install a waterproof coating over.
It has areas under it that I do not want to get wet. Due to the vibration I want
to be sure we have good crack isolation for the concrete floor as well as being
waterproof. Which Epoxy.com Coating System do you recommend?
Norm Lambert:
1.Prepare the concrete properly –
www.epoxy.com/surfaceprep.aspx.
2. If there are any random cracks, repair them with Epoxy.com Product #685 –
www.epoxy.com/685.htm MMA Polymer Crack Healer & Sealer. This material will weld the cracks back together structurally, making it as though the
cracks never happened.
3. Fill any saw cut relieve joints with Epoxy.com Product #11 –
www.epoxy.com/11.htm 100% Solids Epoxy Joint Filler.
4. Cold joints can be saw-cut and filled with Epoxy.com Product #11. If cold joints are large enough, saw cutting
may be optional. Or if the cold joints are to be non-moving you can fill them with Epoxy.com Product #685.
5. Install 1 coat of Epoxy.com Product #899 - www.epoxy.com/899.aspx - 100% Solids Low-Mod Low Viscosity Zero (0) VOC Epoxy Primer at a rate
of 250-300 SF per gallon per coat. Allow to dry overnight.
6. Install 2 coats of Epoxy.com Product #32 –www.epoxy.com/32.aspx - Epoxy.com
Product #32 100% Solids Flexible Epoxy Membrane – Crack Isolation Epoxy. Allow to dry overnight after both coats.
7. Install 2 coats of Epoxy.com Product #2 – www.epoxy.com/2.htm - 100% Solids
Epoxy Based Chemical Resistant Coating with an optional Epoxy Product#50 (small) or Product #51 (large) Anti-Skid additive. Epoxy.com Product#50 and
#51 are polypropylene beads that mix with your Product #2 to produce the desired Anti-skid.
|