Waterproofing Materials, Epoxy, Urethanes and More
Almost any of our products can be used for waterproofing.
Here are some
of the products that are used the most in waterproofing applications:
- Product #4 Urethane Injection
- a one-component, "Acetone Free", MDI based hydrophilic sealing and
grouting compound used to stop water leaks in wet environments. Product #4,
as it mixes with existing water, cures rapidly into a tough, flexible,
closed-cell compound which is insoluble to water and most other chemicals.
- Product #5 Fast Set Gel Adhesive
- a 100% solids high-mod epoxy gel adhesive used for vertical and overhead
bonding and waterproofing applications and structural repairs. It is also
used as a grout for anchor bolts, dowels and rebar
- Product#6 Gel - Normal Setting
Adhesive - high-mod epoxy gel adhesive and waterproofing gel used for
vertical and overhead bonding applications and structural repairs. It is
also used as a grout for anchor bolts, dowels and rebar.
- Product #210
Coal Tar Epoxy is a two component, 100% Solids coating especially
formulated for high build applications. It produces a tough, flexible,
chemical and impact resistant film. It is formulated to be easily
spray applied as thick as 40 mils in 1 coat. It provides excellent
resistance to aggressive water, acids, and caustics. Suitable for
intermittent exposure to 300 degrees F.
Product #216 Coal Tar Epoxy
is a two component coal tar epoxy coating, black in color, used to protect
steel, concrete structures, timber, and other construction materials in
corrosive environments. It meets all requirements of Corp. of Engineers
C-200, Federal Specification DOD-P-23236 (SHIPS), and SSPC 16-91.
- Product #224 Water Cleanable
Epoxy Mortar Resin is a user
friendly, water cleanable, 100% solids waterproof epoxy grout and adhesive.
Used for grouting ceramic tile, brick pavers, and stone, it is supplied in
pre-packaged kits containing resin, hardener, and (in the Product #225 Kit)
mineral fillers that produce a dense, uniform seal. Typical applications for
#224 require resistance to thermal shock, chemicals, and heavy traffic
including meat packers, breweries, canneries, bottlers, CIP areas, and
- Product #250 Water Tank Type
Coating is a 100% solids,
moisture- insensitive epoxy coating, containing no solvents. It is mixed at
a 2:1 ratio, produces a tough, chemical and abrasion-resistant coating for
dry or damp concrete, wood or steel surfaces.
- Product #255 Mastic High Build
Epoxy Coating is a 100% solids, moisture-insensitive, epoxy resin
system. When mixed at a 1:1 ratio, by volume, it produces an excellent
coating for dry or damp concrete, wood or steel surfaces. It is used on
piles, piers, and concrete or steel tanks where concrete or steel needs to
be protected from abrasive environments.
- Product #402 - 2
Component Chemical Resistant Coating - is
a two component1 chemical resistant polyurethane coating with
gloss finish offers excellent abrasion resistance, chemical and stain
resistance, and color retention. Epoxy.com PRODUCT #402
can be used equally well on vertical or horizontal
surfaces. It is ideal for concrete floors and walls in warehouses,
storage facilities, aircraft hangers, animal housing, and vehicle
maintenance facilities. Product is
not for use in California Use Product #406 when a California
Compliant low VOC product is required, or desired.
- Product #406 - Two Component Low VOC Chemical Resistant
Urethane Coating -
is a low VOC compliant urethane that meets all federal and
state environmental air quality standards. The high gloss finish offers
excellent abrasion resistance, chemical and stain resistance, and
superior color retention.Epoxy.com Product #406 can be used
equally well on vertical or horizontal surfaces. It is ideal for
concrete floors and walls in warehouses, storage facilities, aircraft
hangars, animal housing, and vehicle maintenance facilities. Available
in both clear and pigmented formulations,
can be used as a finish coating option for most Epoxy.com Flooring
- System #485 Elastomeric
Polyurethane Traffic Membrane System -
is an Elastomeric Urethane Membrane System,
that is liquid applied. System #485 Elastomeric Membrane System is
seamless, elastomeric (flexible), and UV. Thee qualities make it an
excellent choice for outside applications in direct sun and weather,
where water tightness, durability, and excellent appearance is required.
Its elastomeric properties will allow horizontal movements up to 1/8
inch without breaking.
Epoxy.com System #485 has excellent abrasion and chemical resistance.
The surface of System #485 can be varied to achieve the required anti-skid
and decorative look.
- Product #703
Flexible Gel Adhesive is a 100%
solids, moisture insensitive epoxy resin system, containing no solvents.
When mixed at a 2:1 ratio by volume, it produces a non-sagging waterproof
material that is ideal for repairs on vertical or overhead surfaces. It
exceeds the requirements of ASTM C 881-87, Types I, II, and III Grade 3,
Class "B", "C", "E" and "F".
Product #704 Emergency Epoxy
- is a rapid
setting, two component, 1:1 ratio waterproof epoxy adhesive. It sets in six
minutes and can be put into service in one hour regardless of temperature.
It was designed to bond metals, glass, concrete and wood in a matter of
- Flex Epoxy-
Epoxy Membrane - a flexible resin used as an waterproof epoxy
membrane and as a flexible epoxy mortar. It is a two component, 100% solids
epoxy used as a base in many Flexible Epoxy Floor and Mortar Systems. It
resists cracking caused by horizontal substrate movement, providing a crack
resistant, resilient, sound absorbent, waterproof, durable floor. It offers
stress-relieving properties for floor slabs that show movement or vibration.
It is excellent for use in areas such as mechanical equipment rooms, large
animal rooms and activity centers.
Other Related Areas of Interest