Elastomeric Coatings and MembranesEpoxy Systems, Inc. has a wide variety of elastomeric (flexible) systems for many applications. These elastomeric systems may be made from epoxy, high tech polyurethanes, or other materials. The elastomeric properties may be required for many reasons. Some of these reasons are: waterproofing, joint filling, mechanical and thermal shock absorption.
Product #401 Urethane Coating - a two (2) component, high-solids, urethane coating. Urethane Coating is a two (2) component, high-solids, urethane coating. It is a superior coating that provides the ultimate in weather resistance. It offers outstanding abrasion resistance, excellent chemical resistance and color retention in severe conditions. Product #402 Urethane - a two component1 chemical resistant polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and color retention. It used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangers, animal housing, and vehicle maintenance facilities. Product #403 Urethane Coating Aliphatic Product #404 Fast Cure Urethane Membrane Product #405 Fast Cure Urethane Topcoat. 409 Traffic Bearing Membrane is a Resilient Traffic Bearing Membrane is a 100% solids, ambient cure impermeable elastomer. PRODUCT #409 is resistant to moisture, oils, mild acids, gasoline, and alkalies. PRODUCT #409 when applied to concrete or other surfaces, is resilient and accommodates movement in concrete substrates. PRODUCT #409 is used as a traffic bearing membrane or non-skid coating that retains color and physical properties when exposed to harsh UV conditions. Product #410 Urethane Traffic Bearing Membrane System is a tough, resilient system with excellent elongation. It is applied as a 3-step system - consisting of a primer, traffic bearing membrane - 2 coats, and sealer. It cures at ambient temperatures and is impermeable to moisture, oils, mild adds, gasoline, and alkalies. Product #411 Primer for Product #410 Product #413 Liquid Flashing for Product #410 Product #414 Caulk for under Product #410 Product #415 Elastomeric Membrane a liquid applied, single component, moisture-cured polyurethane. It is the major component of all deck coating systems like the 450 and 450X2 systems. Composition: Liquid-applied, single-component, moisture-cured, polyurethane elastomer. All materials shall be delivered to the jobsite in unopened containers clearly marked and labeled. Product #416 Polyurethane Coating a moisture-cured, liquid applied, polyurethane, based on Aliphatic Isocyanides in combination with additives and pigments to produce a wear resistant, protective and decorative floor coating, for interior and exterior applications. It is primarily used as the protective topcoat of the 450 and 450X2 deck coating systems, but when used with the proper primer, can be used as a stand alone coating. Product #417 Elastomeric Waterproofing A black, liquid applied single-component moisture-cured polyurethane coating, designed to form a seamless, flexible rubber membrane impervious to moisture. Composition: Polyurethane elastomer. A two-component system is available, which does not depend on atmosphere moisture to cure. Type I: For horizontal surfaces. Type II: For vertical surfaces. USES: allows expansion and contraction over a broad temperature range and maintains waterproofing properties under continuous exposure to water. Type II has a thixotropic consistency and may be used on vertical as well as horizontal surfaces. 417 remains flexible from -75°F to +175°F (-59°C to 79°C). Use as a waterproof membrane is intended for use wherever overflow water must be contained. Product #417PW for Potable Water is similar to #417 Elastomeric Waterproofing , but meets potable water standards Product #418 Elastomeric Membrane, a black, self-leveling, liquid applied, two-component polyurethane system, designed to form a tough rubber membrane impervious to moisture. Type I: For horizontal surfaces Type II: For vertical surfaces. Composition: Polyurethane elastomer. A two-component system, which does not depend on atmosphere moisture to cure. Basic Uses: Once cured, #418 allows expansion and contraction over a broad temperature range and maintains flexibility and waterproofing properties under continuous exposure to water above or below grade. PRODUCT #418 has a thixotropic consistency and may be used on vertical as well as horizontal surfaces. PRODUCT #418 remains flexible from -75° to 175°F. Product #419 Waterproofing Membrane Black Waterproofing Industrial Strength is a black, liquid applied, two-component, high solids, chemical cured, polyurethane coating designed to form a tough rubber membrane impervious to moisture. Composition: Polyurethane elastomer. A two-component system which does not depend on atmospheric moisture to cure. Basic Uses: Once cured, #419 allows expansion and contraction over a broad temperature range and maintains flexibility and waterproofing properties under continuous exposure to water above or below grade. It has a thixotropic consistency and may be used on vertical as well as horizontal surfaces. The #419 waterproof membrane is intended for use on steel, wood, concrete, asphalt, tanks, ponds, roofs, foundations, etc. System #430 Elastomeric Multi-Colored Decking System is a liquid-applied, single-component, moisture-cured, polyurethane deck covering system. For waterproofing patios, sundecks, stairways, balconies, etc. Product #430 can be used on all decks where a skid-resistant, long-lasting, wear-resistant, water-proof surface is required. It may be used on new decks as well as on old concrete decks which are damaged, or cracked. The system is suitable for exterior as well as interior applications in all kinds of climates. The coating retains its elastomeric properties in below freezing weather as well as in very hot climates. Product #440 Light Stable Deck Membrane System #450
Elastomeric Flooring system System #450 Mechanical Room Flooring System - Liquid-applied, single-component, moisture-cured, polyurethane deck covering system. System #450X2 Urethane Decking System double strength System #450HT- High Tensile Strength version of the 450 system for extra heavy duty applications Product #451 Aromatic Polyurethane Coating Product #452 Polyurethane Membrane Standard Product #453 Elastomeric Mortar - is a sloping system using an elastomeric binder adhesive mixed with aggregate for sloping decks, based on polyurethane elastomers. Product #454 Polyurethane Membrane non-gassing Product #455 Polyurethane Membrane Grading Material Product #456 Urethane Coating Product #457 Polyurethane Membrane 100% Solids Product #458 2Component Urethane Coating Product #462 High Tensile Strength Urethane Deck Membrane Product #466 High Tensile Strength Aliphatic Top Coating Product #469 Elastomeric Membrane Deck Grade System #470 Multi Use Elastomeric System Product #471 Multi Use Base Coat Product #472 Multi Use HT Product #473 Aromatic Urethane Coating for #470 System Product #474 Aliphatic Urethane Coating for #470 System Product #475 Catalyst for #470 System System #480 Elastomeric Deck Product #490 Athletic and Driveway Surface is a one part liquid applied coating with good ultraviolet light resistance. PRODUCT #490 is designed for use on pool decks, tennis courts, asphalt driveways, and concrete surfaces. This product is recommended for foot traffic areas to reduce slipping on commercial and industrial floors. Due to the waterbased formulation of the product, it can be installed in areas where solvent based coatings are objectionable due to their odors and fire hazards. This material can also be applied over damp as well as dry surfaces Flex Epoxy- Epoxy Membrane - a flexible resin used as an epoxy membrane and as a flexible epoxy mortar. It is a two component, 100% solids epoxy used as a base in many Flexible Epoxy Floor and Mortar Systems. It resists cracking caused by horizontal substrate movement, providing a crack resistant, resilient, sound absorbent, waterproof, durable floor. It offers stress-relieving properties for floor slabs that show movement or vibration. It is excellent for use in areas such as mechanical equipment rooms, large animal rooms and activity centers. |
|
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). 321-206-1833 Customer Service - Ordering and Order Status 714-657-3826 Technical Support 352-489-1625 Fax line to all Departments 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy Systems™ Product Company ("ESI") warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. ESI warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of ESI. If any product fails to meet this warranty, the liability of ESI will be limited to replacement of any non-conforming material if notice of such non-conformity is given to ESI within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). ESI may in its discretion refund the price received by ESI in lieu of replacing the material. No customer, distributor, or representative of ESI is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of ESI. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. ESI reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. ESI'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND ESI SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
|
