Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Epoxy.com Product #600

Flexibilized Novolac Epoxy Coating


DESCRIPTION:

Epoxy.com PRODUCT #600 Flexibilized Novolac Epoxy Coating is a two-component, 100% solids epoxy coating based on multi-functional high performance flexibilized resin. Epoxy.com PRODUCT #600 Flexibilized Novolac Epoxy Coating provides corrosion resistant protection to steel, other metals and concrete. Epoxy.com PRODUCT #600 Flexibilize Novolac Epoxy Coating has excellent resistance to chemicals up to 300�F. Epoxy.com PRODUCT #600 Flexibilized Novolac Epoxy Coating is resistant to continuous immersion in water up to 212�F . Epoxy.com PRODUCT #600 Flexibilized Novolac Epoxy Coating is formulated in a convenient 1 to 1 ratio, by volume mix ratio and has a long pot life to simplify application. Epoxy.com PRODUCT #600 Flexibilized Novolac Epoxy Coating is more effective in applications which entail force curing.

ADVANTAGES:

  • Excellent corrosion barrier properties.
  • Excellent chemical resistance.
  • Excellent adhesion to most metals.
  • It protects concrete, steel, or wood from salts, acids, and alkalies

WHERE TO USE

For Chemical Protection Of:

  • Steel Tanks
  • Piping
  • Heat Exchangers
  • Condenser Boxes
  • Hot Water Tanks
  • Manholes

SURFACE PREPARATION:

Steel Surfaces:

Steel surfaces should be abrasive blasted to a commercial gray metal finish as specified by the Steel Structures Painting Council. For immersion service, blast to near white blast - SSPC SP-10.

Concrete Surfaces

Contamination and other foreign materials must be mechanically removed to ensure a satisfactory bond. All dust and debris must be thoroughly removed.

For more information on surface preparation see Epoxy.com Surface Preparation Guide.

MIXING

Stir Components "A" & "B" thoroughly before mixing. Combine one part by volume of "A" with one part by volume of "B" (mixing ratio 1:1). Mix for not less than three minutes using a slow speed drill (300 to 600 rpm) and Epoxy.com Mixing Paddle. Scrape side and bottom to ensure thorough mixing. Avoid entrapping air. Apply immediately after mixing.

APPLICATION

Epoxy.com Product 3600 Flexibilized Novolac Epoxy Coating may be applied by brush, roller, or spray. All spray equipment must employ traps to prevent water and oil from contaminating coating. Thinning may be required for spraying. Heating may be required for spraying. Heating will shorten pot life to 20 minutes at 100�F. Apply immediately after mixing. Apply 10 mils wet film thickness. Apply topcoat after primer is tack free between 4 and 24 hours.If heated, the tack free time will be reduced. Epoxy.com Fiber Reinforcement is recommend for tank relining. Apply the first coat of Epoxy.com Product #600 Flexibilize Novolac epoxy Coating then place reinforcement. Work reinforcement into coating. Second coat of Epoxy.com Product #600 is applied after about 3 hours. Be sure to apply second coat within 24 hours of first coat.

COVERAGE

100-200 square feet per gallon (per coat), dependent upon surface texture and desired thickness. When applying Fiber Reinforcement the coverage will be less.

PACKAGING

Epoxy.com Product #600 Flexibilized Novolac Coating is packaged in 2 gallon and 10 gallon units.

CAUTION:

WARNING! A Component contains epoxy resin. B Component contains alkaline amines; strong sensitizer. May cause skin sensitization or other allergic responses. Use with good ventilation, particularly if material is heated or sprayed. Prevent all contact with eyes or skin. Wear protective clothing, goggles, gloves, and/or barrier creams. Keep container closed when not in use. Wash thoroughly after handling.

PHYSICAL PROPERTIES

TYPICAL PROPERTIES PRODUCT #600

Pot Life @ 70-75� F 45-60 min. Pot life after mixing is approximate
Working Time  Application Time @ 70-75� F 35 min.
Cure Time @ 70-75� F Foot Traffic Overnight/16 hrs.
Light Vehicular Traffic 1-2 days
Service 3-7 days
Mix Ratio (by volume) Part A: Part B 1:1
Primer (concrete) Self-Priming
Hardness, Shore D ASTM D 2240 65-80
Tensile Strength, psi ASTM D 638 7 days cure @ 70-75� F 4,000 +
Elongation % @ Break ASTM D 638 7 days cure @ 70-75� F 5-10
Compressive Strength, psi ASTM D 575 10,000+
Impact Strength, in.-lbs. ASTM D 4226 Falling Ball Method 10+
Low Temperature Flexibility ASTM D 3111,
360� Bend 1/4" Mandrel @ -15� F
10 mil thickness
Passed

 Skip Navigation Links

Epoxy.com Home PageExpand Epoxy.com Home Page

Proper mixing and installation is critical to the optimal success of all products.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
A Vermont Corporation
USA

We have products that have passed the test of time as well as the best new Systems available today.

Since 1980 - 40 years of the highest quality products

Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)

Closed for lunch from 12Noon to 1PM


321-206-1833  Customer Service - Ordering and Order Status
                         Katey Lambert-Fontaine, VP - Chief Operations Officer
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

Copyright © 1994-2023 (providing online information about the right product for the right job for nearly 30 years)  EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks
We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.